Advertisement

Gas Metering Valve (2891)

March 9, 2006 12:10 pm | South Bend Controls, Inc. | Product Releases | Comments

The gas metering valve is a direct-acting proportional Servoid valve. The Servoid valve driver provides linear proportional control of the metering orifice which yields linear proportional flow.

LISTED UNDER: Other | Proportional | Control

Gas Plasma System

February 8, 2006 5:57 am | Plasmatech, Inc. | Product Releases | Comments

The A400 gas plasma system has a 16 x 16 x 19 in. aluminum chamber, is clean room compatible, and available in both table-top and tall free-standing cabinet versions. Gas introduction via mass flow controllers and magnetic valves ensures precise gas measurement.

LISTED UNDER: Surface Modification | Control | Flow

Leak-Free Connections Speed Endoscope Reprocessing and Enhance Safety

January 9, 2006 11:47 am | Product Releases | Comments

The Project: To ensure the safe transfer of chemical disinfectants within an endoscope reprocessing unit. The Solution: Use custom fabricated couplings that provide a leak-free fluid pathway.

LISTED UNDER: Couplings | Control | Flow
Advertisement

Solenoid Valve (2477)

November 2, 2005 7:09 am | Humphrey Products Company | Product Releases | Comments

The HKL5 valve is designed to offer zero leakage in liquid and gas applications. This direct acting solenoid valve is 12.6 mm wide, with a high 0.05 C v flow rate, low 1.8 watt power consumption, a pressure rating from vacuum to 30 psig, and a working temperature range from 32&#176F to 175&#176F.

LISTED UNDER: Solenoid Valve | Flow | Gas Valve

MDT Exclusive: Control Valve

August 31, 2005 8:56 am | Afa Controls, Llc | Product Releases | Comments

The MEMS (micro-electro-mechanical-systems) valve uses electrostatic force to direct the flow of inert gases. It offers clean service by eliminating solenoids, spools, springs, and internal seals.

LISTED UNDER: Control | Control | Flow

Plastic Material Innovations Help Shape Healthcare Industry

June 30, 2005 6:40 am | Rtp Company | Product Releases | Comments

An example of the successful application of wear-resistant compounds is this glucose meter. It contains internally lubricated, color-matched polycarbonate to reduce wear and motion-induced noise.

LISTED UNDER: Thermoplastic Elastomers | Injection Molding | Flow

What’s Happening With Pumps and Valves

May 3, 2005 7:55 am | Product Releases | Comments

Figure 1. New peristaltic pump roller designs with a convex roller and concave tubing bed allow pumping media containing live cells with much less damage to the cells. The tube is squeezed in the middle first while the edges remain open, so the cells escape shearing or crushing.

LISTED UNDER: Other | Compressor | Diaphragm Pump

EVP Proportional Control Valves

December 8, 2004 10:45 am | Clippard Instrument Laboratory, Inc. | Product Releases | Comments

Clippard Instrument Laboratory, Cincinnati, has a new CD that gives detailed information about its line of EVP proportional control valves, which can control flow ranging from 0 to greater than 20 liters per minute.

LISTED UNDER: Control | Proportional | Control
Advertisement

Gas Metering Valve

July 8, 2004 11:39 am | South Bend Controls, Inc. | Product Releases | Comments

The gas metering valve is a direct-acting proportional SERVOID&reg valve driver provides linear proportional control of the metering orifice which yields linear proportional flow. This valve features a suspended-armature design that is inherently reliable and results in very low hysteresis.

LISTED UNDER: Other | Proportional | Control

Stopcock Valve

March 4, 2004 5:50 am | Ark-Plas Products, Inc. | Product Releases | Comments

This Stopcock Valve is manufactured for use in low and medium pressure lines using fluid or gas. They are suitable for vacuum and pressure applications up to 50 PSI. The valve features a flow-through design that limits restriction through the valve stem.

LISTED UNDER: Stopcocks | Flow | Gas Valve

Check Valves (453)

March 4, 2004 5:50 am | Circle Seal Controls, Inc. | Product Releases | Comments

These check valves' robust design provides for longer and enhanced performance with operating pressures from 0 to 10,000 psig with zero leakage. They are offered in sizes from 1/8 in. to 2.0 in., in a wide variety of connections, for both gases and liquids.

LISTED UNDER: Check | Gas Valve | Silicone

Solenoid Pumps/Valves

April 10, 2003 11:34 am | Bio Chem Valve Inc | Product Releases | Comments

This line of manifold inert solenoid pumps and valves has a footprint as small as 0.5 in. for space-saving mounting. A highly efficient threaded collar design is employed to secure the valve or pump to the manifold.

LISTED UNDER: Solenoid Valve | Gas Valve

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading