This ultra-miniature M3 threaded quick disconnect assembly is comprised of a brass internal end and a stainless steel external end. The entire assembly weighs only 3.4 grams. The internal end is designed with an automatic shut-off valve and an M3 internal thread. It is only about 16.
Pumpsil-D platinum silicone dispensing tube is specially formulated and designed specifically for high accuracy dispensing applications in the biopharmaceutical industry.
Top Technologies Medical devices involve multiple technologies, from metallurgy to microprocessors.
Fluoroplastic tipped tubes are available to be used as IV or needle introducers. These tubes are designed with a tapered and/or beveled end to assist in the insertion of IVs and facilitate the transfer or extraction of fluids and can be laser marked for identification purposes.
Available in 12 twin-wheel models, the TwinTech Combi total lock swivel caster range is designed for medical equipment, hospital beds and stretchers, and for other applications requiring dependable performance combined with design style.
Refined for optimal performance at the lowest price, the Series 5120 filtered power entry module is particularly suited for single-phase power supplies used in Medical Devices, which are governed by stringent EMC emission and immunity standards.
The HTK Series of single-output, low-voltage, switch-mode power supplies offer a wide choice of case type, output connectivity, and front panel coupled with a choice of 11 output voltages between 3.3 and 54 V. The HTK300 units offer a maximum output power of 198 W for the 3.
The STAC6-Q stepper drives feature Q programming—a comprehensive programming language with options for downloading, storing, and executing multiple programs with a single drive. They provide current output from 0.5 to 6.
The FB Series line of precision linear stages uses ceramic servo motors. The series is available in a wide range of sizes, with slides as narrow as 50 mm and up to 150 mm wide. All stages are based on crossed roller bearings and are provided with a non-contact linear encoder.
ProcessMate 5000 centrifuge is a fast, simple, and cost-effective way to purge medium- to high-viscosity fluids like epoxies, greases, and silicones of bubbles and air pockets that can affect shot-to-shot consistency in pneumatic dispensing processes.
The RoHS compliant 1K2 is a high quality changeover slide switch recommended for PCB configuration applications. The switch occupies a board space measuring only 10 x 2.5 mm with a height of 4.5 mm excluding actuator. It is available with 2.
The Arcam EBM S400 is a rapid manufacturing and prototyping system that makes 100% solid metal parts. The highly efficient system produces metal parts three to five times faster than other additive fabrication methods.
The Swiss 10 A power cords and cordsets are for equipment rated up to 10 A with service at 250 VAC. They are approved to the SEV, Electrosuisse SEV 1011:98, CH-Type 12, Standard-Sheet SEV 6534-2. The power cords and cordsets are available from stock with 1.00 mm 2 HAR cable in 2.5 m length.
ProPact is a peracetic acid culture test kit for use in the Steris System 1 sterilization process. ProPact involves an improved, more distinctive color change from purple to yellow and offers results in only 24 hours (improved from 48 hours).
This signal tap box, part number 7B5311D0, is designed to tap a signal from a standard 10-lead EEG signal for strip chart recording, saving to an electronic file or “out of the room evaluation” such as a sleep lab. Lead length, wiring configurations, connectors, and labels can be customized.