Product Releases
High Voltage Connector
April 29, 2004 6:27 am | ODU-USA, Inc. | CommentsDesigned for harsh environments, the IP 68-rated, 6-position, high voltage push-pull connector is available with six high voltage contacts each having 3.5 kV operating voltage. Termination is soldercup on the plug side and PCB or soldercup on the receptacle side.
Instant Adhesives
April 29, 2004 6:27 am | Permabond Engineering Adhesives | CommentsPermabond 940 are non blooming, low odor adhesives designed to bond plastics, rubber, and metal and are best suited for applications that are appearance sensitive. Common cyanoacrylates can cause a white frosting on the surface of the components surrounding the bond site.
Unbacked Membranes
April 29, 2004 6:27 am | Millipore Corporation | CommentsUnbacked Hi-Flow™ Plus 110 and 135 membranes are offered for high protein binding in lateral flow diagnostic assays. The membranes are intended for sensitive rapid diagnostic test kits, including infectious disease, drugs of abuse, cardiac markers, and other analytes.
Epoxy Adhesive (713)
April 29, 2004 6:27 am | Master Bond, Inc. | CommentsThis epoxy is a unique two-component, room temperature curing, high temperature resistant adhesive called EP35. It produces high strength bonds whose strength is maintained even after long exposures to temperatures in the 450°F to 500°F range.
Light Curtain
April 29, 2004 6:27 am | Scientific Technologies, Inc. | CommentsThe MiniProtect MP2100 Protective Light Curtain provides reliable, cost effective Type 2 guarding on equipment where low risk factors have been assessed. The control circuitry is housed within the transmitter and receiver. No separate control box is required.
Hex Keys
April 29, 2004 6:27 am | Steritool | CommentsThese 1/3 in. Drive Hex Keys are made entirely from stainless steel and are designed for repeated autoclaving. Designed for use in applications that require precise torque measurement, these keys can be used directly with a torque wrench or any standard square drive.
Ceramic/Coatings
April 29, 2004 6:27 am | Morgan Advanced Ceramics | CommentsCeramic and coating materials offer high-wear resistance, inert surfaces, and superior dielectric strength, resulting in extended product life and reduced costs.
Tubefilling Machine
April 29, 2004 6:27 am | Iwka Pacsystems | CommentsThe clean, modular cantilever design and smooth surfaces of the TFS 80-2 enable the machine to exceed cGMP standards by allowing for effortless and thorough cleaning.
Circulation Heater
April 29, 2004 6:27 am | Watlow Electric Manufacturing Company | CommentsCast-X Series 1000 circulation heaters provide a safe heating method for volatile, viscous, or mildly corrosive liquids. The heaters provide accurate and consistent temperature control, are designed for greater durability, and are more compact than traditional heat exchangers.
Miniature Clamps
April 29, 2004 6:27 am | Oetiker, Inc. | CommentsClamps and rings are offered for medical applications, which are deisgned for outside diameters as small as 2.5 mm to ensure leak-free sealing and fastening solutions. They are suitable for hose supply lines with chemicals, ink, liquids, and gases. The clamps are vibration proof.
Macroscope
April 29, 2004 6:27 am | CommentsOffering a high level of accuracy, comfort, and convenience is the Leica FS C comparison macroscope for real time comparison, quality control, and medical device inspection.
Ink-Jet Printer
April 29, 2004 6:27 am | Matthews International Corporation | CommentsThis drop-on-demand ink-jet printer—the Jet-A-Mark S.C.I. F.I.™ 3400—replaces the older 3200 model and is offered with new Windows-style software. The 3400 prints 1-5 lines up to 60 dpi, is flexible and reliable, and requires no special shutdown/startup procedures.
LCD Modules
April 29, 2004 6:27 am | Optrex America, Inc. | CommentsThe economical F-51451 Series of 8.1-inch diagonal LCDs feature chip-on-glass construction, minimum 50,000-hour lamp life, and are available in two display modes.
Conductive Urethane
April 29, 2004 6:27 am | Mearthane Products Corp. | CommentsDurethane™ C conductive urethanes are available in a wide range of solid and foam formulations. Durethane C is a machinable, thermoset polyurethane that contains low percentages of conductive additives (0.
Machine Screws
April 29, 2004 6:27 am | Keystone Electronics Corp. | CommentsThis enlarged group of Zinc plated steel and nylon machine screws and nuts are suited for a variety of fastening applications.
