Product Releases
Rotary Stage
June 8, 2004 9:52 am | CommentsThe ASR1100 series is an extension of the ASR1000 direct-drive rotary stage used in many laser machining applications, including the manufacture of the most technologically-advanced cylindrical devices in use today.
Contract Manufacturing
June 8, 2004 9:52 am | Enova Medical Technologies | CommentsCompany is an experienced provider of contract manufacturing services for the medical device industry, and the management team has developed and commercialized over 100 devices while at medical device corporations.
Power Supply (833)
June 8, 2004 9:52 am | GlobTek, Inc. | CommentsThe GT(M)2065-80 series delivers up to 16.67 Amperes of continuous output power with 10CFM of airflow for 3.3vdc output applications, 11 Amperes for 5vdc applications. Series has output voltages ranging from 3.3V to 48V in 0.
Code Reading Software
June 8, 2004 9:52 am | Cognex Corp. | CommentsBased on the company's patented PatMax® technology, IDMax is designed for Direct Part Mark
Controller
June 8, 2004 9:52 am | Fluid Metering, Inc. | CommentsThe V200 Stroke Rate Controller is designed for precision control of all FMI V-Series Variable Speed Metering Pumps. The V200 Controller allows pump speed settings to be adjusted either manually in 0.
Fluid Insert Connector
June 8, 2004 9:52 am | ODU-USA, Inc. | CommentsThe ODU MEDI-SNAP Fluid Insert connector is a special version in the ODU MEDI-SNAP product line. It operates at a maximum working pressure of 2 bar. The plastic tubing can range from 5.3 to 6.5 mm diameter. As all MEDI-SNAP connectors, this version is IP 50 and offers 6 color codes.
Cabinets (825)
June 8, 2004 9:52 am | Schroff | CommentsA line of affordable assemble-to-order cabinets were introduced to meet the specific requirements of individual customer applications.
Thin Film Resistor
June 8, 2004 9:52 am | CommentsIn response to demands from design engineers for increased resistance values in smaller packages, resistor manufacturer TT electronics IRC offers its Chromaxx™ Series, chromium silicon oxide resistors with resistance values up to 15M• for medical and instrumentation applications.
TPR Tubing
June 8, 2004 9:52 am | Newage Industries, Inc. | CommentsSuprene® TPR tubing is produced under Good Manufacturing Practices using first-quality, polypropylene-based TPR (thermoplastic rubber).
Linear Motion Components
June 8, 2004 9:52 am | Bosch Rexroth Corporation | CommentsThis 14-page, color brochure, "Precision in Motion," provides an overview of the company's linear motion solutions, including a description of components that are precision engineered to perform reliably and with little or no maintenance.
Disposable Device Manufacturing
June 8, 2004 9:52 am | Ibs-Integrated Biosciences Inc. | CommentsIBS offers complete contract manufacturing of class I and II disposable medical devices. From product design support and prototyping through assembly, packaging, and sterilization, it can handle the entire outsourcing program.
Tubing Cutter
June 8, 2004 9:52 am | The Eraser Company (Always Moving Forwardâ®) | CommentsThe WC601 Series Automatic Wire and Tubing Cutters cut flexible tubing up to 1-1/8 in. OD into lengths from 0.1 in. up to 99,999.99 in. to very tight specifications such as those required for medical applications.
Brush DC Motors
June 8, 2004 9:52 am | Pennengineering Motion Technologies | CommentsPittman® Series 14000™ brush-commutated DC motors and gearmotors feature 11-slot skewed armatures designed to enhance performance by minimizing magnetic cogging (or reluctance torque). This series of motor products offers quiet and smooth operation for a wide range of power applications.
Telecentric Lens
June 8, 2004 9:52 am | Edmund Optics | CommentsThe 0.08X MVO® Telecentric Lens, when coupled to a 2/3 in. format CCD, offers a 4 in. horizontal field of view, which is much larger than the previous field of view (71 mm at 0.125X) available from this line of lenses.
Laser Machining/Marking
June 8, 2004 9:52 am | Avicenna Technology, Inc. | CommentsCompany offers the colorless laser machining of Polyether Urethane tubing, and the vivid laser marking of pigmented Silicone tubing.
