"Intelligent Control" Solid State Relay Assemblies can interface with a variety of control input signals. Rated for loads up to 100 A at a maximum 40°C ambient temperature, nine different models are available to meet the needs of a wide variety of applications.
Acrosser B1551 embedded computer completely support RTOS & WinCe. It's the 3.5 in. low power and fanless embedded single board computer with LAN, LCD, Voice, serial, USB, compact flash, DOC, and PC104 expansion. It has an 8 year life circle for medical device projects.
The DL3-PC utilizes a Posiflow rotary pump design which has no gears to wear and is resistant to abrasive fillers. Both pumps are driven by brushless AC motors. A key feature is touch pad programming of mix ratio and flow rates.
The Norgren KIP range of brass body valves can be specified with either brazed in fittings or tube ends and is ideal for OEM applications where leaks can simply not be tolerated. The customer can select from standard size fittings and tubes or the company can engineer a custom design to suit.
Plastic Welder™ SD (sandable) adhesive is ideal for bonding PPO, PVC, and various polyesters, polycarbonates, styrenics, and composites where filler material must be sanded to a smooth, nonporous finish.
Tough Air Filters are designed to withstand harsh environments, including those where high temperature, high humidity, chemicals, or solvents are present.
This 4.9-inch diagonal 1-DIN color active matrix TFT LCD offers an economical standard product for display designers involved in medical diagnostic instrumentation.
The L2S Bench Wire Stripper removes film insulations from round wires between 8-29 AWG (3.25-0.28 mmo) including enamel, Formvar, ML, armored poly-thermaleze and epoxy. A high-speed rotating insert quickly strips insulation from the surface of the wire.
Designed to be resistant to bacteria, Thermoplastic Elastomer (TPE) cords present an alternative to Neoprene and offer enhanced retractile properties not offered by PVC.
Available in vial colors that include clear, cobalt blue, black, yellow, red, green, gray, white, and amber, these vials, droplets, and caps assemble to make an eye-catching container.
Compact electromechanical clutches provide consistent timing for rotary motion control where cost is critical. The EC5, EC15, EC20, and EC30 clutches are designed for dependable operation and low power consumption in a variety of OEM applications.
The AS series rotary screw compressors, available in 20, 25, and 30 hp models, feature Sigma Profile™ airend and deliver flows from 59 to 124 cfm and pressures from 90 to 217 psig. They are designed for excellent reliability, ease of maintenance, and energy efficiency.
Using the company's patented vacuum molding system, the Vacu-Jet™ Vacuum Rubber Injection Molding System eliminates or minimizes the entrapment of air or gases that cause defects in molded products.
The JAZ15 family of non-isolated point-of-load converters can be programmed with external resistors to deliver tightly regulated outputs from 0.9V to 3.36V at up to 15A, so customers can use the same converter for multiple applications on a board, cutting inventory requirements.
The KL73 1H(0201) chip inductor provides a narrow inductance deviation with a complete range of inductance values, making it an excellent choice for high frequency circuit matching. It is ideal for high volume and small size applications and its compact size allows for high density mounting.