Advertisement
Product Releases
Subscribe to MDT Magazine Product Releases
View Sample

FREE Email Newsletter

MDT Daily

Wire EDM (2801)

February 9, 2006 8:45 am | Gf Agie Charmilles | Comments

The Robofil 240cc uses the CC generator to dramatically improve machining speed while preserving the surface integrity of the machined material. With the machine, Charmilles brought the technology of high-speed EDM to the wire EDM market.

Microfabrication Services

February 9, 2006 8:45 am | Mound Laser & Photonics Center, Inc. | Comments

Company has acquired two laser systems to expand its capability in microfabrication. The first laser is a high-pulse repetition rate ultrafast (10 ps) laser and is the company’s second micromachining laser. The image is an “as machined” pattern in titanium. The diameter of the pillar is 0.

DC Servomotors

February 9, 2006 8:45 am | Comments

MAE brand Series 600 brush-commutated DC servomotors are suited for heavy-duty power applications with their capability to achieve continuous torque up to 198 oz-in and speeds up to 3,500 rpm, depending on model.

Advertisement

DC Brush Drive

February 9, 2006 8:45 am | Performance Motion Devices, Inc. | Comments

The fully enclosed, compact ION DC brush drive is the second in a new family of high performance motion control drives providing network connectivity, power amplification, and advanced motion control features in a rugged, easy to use package.

Data Matrix Decoding Software

February 9, 2006 8:45 am | The Value Engineering Alliance | Comments

PIATI_PGP was developed for organizations and individuals seeking an automatic identification component for data matrix decoding software applications.

TOPICS:

CNC Lathes

February 9, 2006 8:45 am | Mori Seiki Usa, Inc. | Comments

To continue driving down cost per part, a series of lathes were developed that provides milling capability as robust as a machining center.

Dispense Valve (2807)

February 9, 2006 8:45 am | Sealant Equipment & Engineering, Inc. | Comments

The model 2200-245-125 Tip-Seal dispense valve is designed for precision dispensing of low- to high-viscosity flowable materials. It is also used in high-speed stitching or repetitive on-off applications where short segments of material are deposited onto a surface.

Bipolar Chopper Drive

February 9, 2006 8:45 am | Comments

The DCS4020 bipolar chopper drive has been designed for easy set up and use. It is ideal for development projects&#151just connect a single power supply and a motor and the drive is ready to run. Motor current is set using an on-board potentiometer.

Advertisement

FDA Documents Library

February 8, 2006 6:41 am | Comments

Every week, FOI Services adds newly received FDA documents to its online library. One can always see what's new at the FOI Online site and also pick up a complimentary "Document of the Week" by clicking on the "Document of the Week" picture on the home page. Information: www.foiservices.com .

FDA/ISO White Paper

February 8, 2006 6:41 am | Comments

Titled "Change Control - Quality Improvement in FDA & ISO Environments," this white paper discusses what FDA inspectors and ISO auditors consider one of the most critical regulatory principles.

3D Motor Models

February 8, 2006 6:41 am | Comments

In support of customer 3D modeling needs, Empire Magnetics has recently made available on its website more than 2,000 solid models of various motor and related product combinations.

Online Interactive Design Guide

February 8, 2006 6:41 am | Comments

Gore has added assemblies to its online interactive design guide. The tool now provides a menu of connector options to configure a complete Gore high flex flat cable assembly or Gore trackless cable assembly with ten day lead times.

Plastic Gears Booklet

February 8, 2006 6:41 am | Comments

The third in its Parts Smarts booklet series, UFE introduces “The 9 Plastic Gear Must Ask Questions.” The online booklet answers essential questions for engineers to consider when designing plastic gears.

FDA Compliance Protocols

February 8, 2006 6:41 am | Comments

As physicians, patient groups, and Congress pressure the FDA for stronger monitoring and recall action on devices and diagnostics, a manufacturer’s risk-management program must be stronger than ever.

Injection Molded Prototypes

February 8, 2006 6:41 am | Comments

Protomold offers fast turnaround on injection molded prototypes, plus the ability to have them shipped even faster for a premium. Now, the ProtoQuote web-based quoting system gives users the ability to explore the effect of different delivery schedules on a quoted price.

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading