Product Releases
Subscribe to MDT Magazine Product Releases
View Sample

FREE Email Newsletter

MDT Daily

Miniature Joints

February 6, 2006 10:30 am | Tolomatic, Inc. | Comments

With an outer diameter as small as 8 mm, these high precision miniature joints are suited specifically for medical equipment and many applications in which space is restricted.


Actuator (2727)

February 6, 2006 10:30 am | Tolomatic, Inc. | Comments

In most applications, the B3W series electric belt drive actuator can be used as a direct drop-in replacement for the B3B actuator, allowing users to accelerate larger loads faster without additional cost. It is designed for high wear resistance, repeatable accuracy, and high load capacities.

Camera (2729)

February 6, 2006 10:30 am | Comments

The miniature, high resolution, progressive scan, “ice-cube-size” CCD camera family&#151the IK-52V (1/2 inch) and IK-53V (1/3 inch) are 29 mm ³ and weigh only 45 grams each. Both feature VGA resolution. The 659 x 494 pixels feature horizontal resolution at 500 TV lines.


Chemical Resistant Tubing

February 6, 2006 10:30 am | Parker Texmed | Comments

A full line of chemical resistant tubing products extruded from TexFluor PTFE, FEP, PFA, or MFA is available for use in material handling applications such as delivery systems.

Torque Brushless Motor

February 6, 2006 10:30 am | Maxon Precision Motors, Inc. | Comments

The “EC 45 4-pole” delivers the performance and lifetime of a brushless motor. A powerful 4-pole neodymium magnet provides high torque without a gearhead. The motors are electronically commutated thus enabling extremely long motor life, since there are simply no mechanical brushes to wear out.

Screen Printing Machine (2723)

February 6, 2006 10:30 am | Systematic Automation Inc. | Comments

This fully automated screen printing machine is designed for use with injection molding robots. The machine dial is specially made to match the number of cavities in the injection mold. The injection mold unload robot first takes the printed and UV cured products off the machine dial.


February 6, 2006 10:30 am | Endicott Research Group | Comments

The LDS series inverters provide a high efficiency DC-AC inverter in a compact form factor for use with a range of LCD panel sizes from 6.4 in. to 12.1 in. diagonal. Measuring only 133.


IR Temperature Transmitter

February 6, 2006 10:30 am | Newage Industries, Inc. | Comments

The IRtec Rayomatic 10 non-contact infrared thermometer is designed for high performance and extreme efficiency, both requirements in abrasive conditions.


Electric Motor Testing

February 6, 2006 10:30 am | Sakor Technologies, Inc. | Comments

The DynoLAB LT is a low-cost, complete turn-key system for electric motor testing. It offers the

Tantalum Polymer Capacitors

February 6, 2006 10:30 am | Comments

Allowing design engineers to further reduce the size of portable electronic devices, these tantalum polymer capacitors deliver a high capacitance value capability. Designated the TCJ series, the capacitors are one to three capacitance value (CV) levels higher than other devices on the market.

Magnetic Latching Solenoids

February 6, 2006 10:30 am | Comments

B16L, B17L, and C5L miniature open frame magnetic latching solenoids are each well suited for battery operation while providing strokes up to 0.18 in. and forces up to 3 lbs. They offer up to 100,000 cycles with moderate force output.


Cameras (2707)

February 6, 2006 10:30 am | Ppt-Vision | Comments

These two intelligent color camera models are designed for in-line industrial vision applications. The Impact T28 and Impact T24 are the latest additions to the Impact T-series&#151intelligent cameras with full-scale vision image processing capabilities built into the camera.

Connector System (2705)

February 6, 2006 10:30 am | Fci | Comments

RoHS-compatible versions are available of the Conan 1.0 mm pitch, low-profile, board-stacking connector system.

Shielded Atrial Catheter Cable

February 6, 2006 10:30 am | Bioconnect | Comments

A line of shielded atrial catheter cables is available for use with medical diagnostic equipment. These cables meet DIN 42802-2 and IEC 60601-1 sub 56.3(c) specifications and all applicable AAMI/AMSI EC-53 performance requirements.


Balloon Forming Machine

February 6, 2006 10:30 am | Interface Catheter Solutions | Comments

This “clam shell” balloon forming machine provides very accurate and repeatable controls needed to produce high-quality balloons. The machine features electrically heated, longitudinally split molds with chilled water cooling.


You may login with either your assigned username or your e-mail address.
The password field is case sensitive.