ASTM F2338-03 is a non-destructive vacuum decay leak test method for TYVEK™ trays. The approval was based on PTI sponsored research studies utilizing the Pti-225 vacuum decay leak tester.
Designed to transfer parts and equipment into and out of cleanrooms, the Series 18 Pass Thru Air Locks significantly reduce potential contamination by decreasing the number of people entering and exiting the cleanroom. The units are available in white polypropylene or optional stainless steel.
The ASR1100 series is an extension of the ASR1000 direct-drive rotary stage used in many laser machining applications, including the manufacture of the most technologically-advanced cylindrical devices in use today.
Company is an experienced provider of contract manufacturing services for the medical device industry, and the management team has developed and commercialized over 100 devices while at medical device corporations.
The GT(M)2065-80 series delivers up to 16.67 Amperes of continuous output power with 10CFM of airflow for 3.3vdc output applications, 11 Amperes for 5vdc applications. Series has output voltages ranging from 3.3V to 48V in 0.
Based on the company's patented PatMax® technology, IDMax is designed for Direct Part Mark
The V200 Stroke Rate Controller is designed for precision control of all FMI V-Series Variable Speed Metering Pumps. The V200 Controller allows pump speed settings to be adjusted either manually in 0.
The ODU MEDI-SNAP Fluid Insert connector is a special version in the ODU MEDI-SNAP product line. It operates at a maximum working pressure of 2 bar. The plastic tubing can range from 5.3 to 6.5 mm diameter. As all MEDI-SNAP connectors, this version is IP 50 and offers 6 color codes.
A line of affordable assemble-to-order cabinets were introduced to meet the specific requirements of individual customer applications.
In response to demands from design engineers for increased resistance values in smaller packages, resistor manufacturer TT electronics IRC offers its Chromaxx™ Series, chromium silicon oxide resistors with resistance values up to 15M• for medical and instrumentation applications.
Suprene® TPR tubing is produced under Good Manufacturing Practices using first-quality, polypropylene-based TPR (thermoplastic rubber).
This 14-page, color brochure, "Precision in Motion," provides an overview of the company's linear motion solutions, including a description of components that are precision engineered to perform reliably and with little or no maintenance.
IBS offers complete contract manufacturing of class I and II disposable medical devices. From product design support and prototyping through assembly, packaging, and sterilization, it can handle the entire outsourcing program.
The WC601 Series Automatic Wire and Tubing Cutters cut flexible tubing up to 1-1/8 in. OD into lengths from 0.1 in. up to 99,999.99 in. to very tight specifications such as those required for medical applications.
Pittman® Series 14000™ brush-commutated DC motors and gearmotors feature 11-slot skewed armatures designed to enhance performance by minimizing magnetic cogging (or reluctance torque). This series of motor products offers quiet and smooth operation for a wide range of power applications.