Product Releases
Subscribe to MDT Magazine Product Releases

AC Solenoids

October 15, 2004 7:06 am | Comments

The "High-Force" Model 16 family of laminate AC solenoids combines high force and high efficiency in a small package. This solenoid delivers 25% to 50% more pulling power than a conventional AC solenoid in a smaller, lighter package, all at the same power consumption.

Power Supply (1331)

October 15, 2004 7:06 am | Xpiq Inc. | Comments

The PCM120 is a small, 120 W, high efficiency, AC/DC external power supply for medical applications. It features a safety ground leakage current of less than 300 &#181A at 240 VAC. &#149 3.74 in. x 7.08 in. x 1.85 in./1.88 lbs.

Vacuum Pump (1341)

October 15, 2004 7:06 am | Piab Usa, Inc. | Comments

The P3010 is a multi-stage ejector vacuum pump that features the company's patented COAX technology. COAX integrates the internal components of a multi-stage vacuum pump into a vacuum cartridge. &#149 Compressed air-driven pump &#149 Push-in function modules &#149 Connector modules &#149 0.65 in.



October 15, 2004 7:06 am | Micromo | Comments

With an outer diameter of only 8 mm, this family of mini-drives provides maxi power. It is an impressive solution with a wide variety of combination possibilities using DC-Micromotors, with precision gearheads and micro-encoders. &#149 Series 0816

ID Readers

October 15, 2004 7:06 am | Cognex Corp. | Comments

The Dataman 6400 and 6500 hand-held readers combine high-speed processing with optimized lighting, optics, and software for fast, accurate decoding of the most challenging 1D and 2D codes.

Actuator (1319)

October 15, 2004 7:06 am | Thk America, Inc. | Comments

The high-speed Type SKR actuator is available in two smaller sizes of 20 mm and 26 mm. With the Type SKR, customers can experience the benefits of both Caged Technology Ball Screw and Caged Ball LM Guide Technology in one high-speed actuator. &#149 Positioning accuracies: 0.

Photo Etched Components

October 15, 2004 7:06 am | VACCO Industries | Comments

Company offers precision photo etched components to a vast array of markets. A wide variety of materials includes: nitinol, kapton, stainless steel, lead, titanium, copper, molybdenum, and nickel.


October 15, 2004 7:06 am | Opto Diode Corp. | Comments

These U.S. manufactured photodiodes are specifically designed to provide high-quality, high-reliability performance at prices previously only available with lower end off-shore product.


Pressure Sensor

October 15, 2004 7:06 am | Comments

This range of all fluid pressure sensors are for deployment in industries that require the advantage of robust design in harsh operating environments.

Orientation Sensor

October 15, 2004 7:06 am | Microstrain, Inc. | Comments

The 3DM-GX1 combines the outputs from three angular rate gyros with three orthogonal DC accelerometers and three orthogonal magnetometers.

Brushless DC Kit Motor

October 15, 2004 7:06 am | Comments

The 000-0326 high performance brushless DC kit motor is designed for low voltage applications where an efficient, high torque motor is required. &#149 Operating voltage: 12 volts &#149 1 HP of continuous power &#149 5.38 in diameter x 2.4 in.

Syringe Dispense System

October 15, 2004 7:06 am | Comments

The Loctite Analog Syringe Dispenser is a pressure-time-vacuum system that will dispense 10, 30, 55, and 300 ml syringe packages. It can be operated in manual or automatic timed dispense mode to dispense dots or beads, or to fill syringes.


October 15, 2004 7:06 am | Waldmann Lighting | Comments

The Omnivue fully rotational magnification light offers an optional pin mount that is compatible with assembly bench "pin mount" receptacles. It also attaches to workstations by a standard clamp, wall bracket, portable stand, or portable table base.

Mobile Workcenters

October 15, 2004 7:06 am | Intermetro Industries Corp. (Metro) | Comments

Starsys mobile workcenter is a modular laboratory furniture system that facilitates fast lab configuration. In a matter of minutes, an entire lab setting can be reconfigured to support a new research protocol, changing technology requirements, or increased throughput.

Wire Stripper/Twister (1291)

October 15, 2004 7:06 am | Comments

Using a single carbide rotary blade, the C100S Rotary Wire Stripper and Twister processes solid and stranded wire, Teflon, PTFE, PVC, nylon, and KEL-F between 0.031 in. to 0.228 in. OD. Both blade depth and strip length can be swiftly and smoothly adjusted while the machine is running.


You may login with either your assigned username or your e-mail address.
The password field is case sensitive.