TM9720 is found in medical devices where skin contact is possible, such as surgical drapes, various diagnostic sensors, and dental dams.
The EchoTherm™ Model CB20 Constant Temperature Chilling/Heating Mini-Circulator is designed for use with small volume sample holders like water jacketed cuvettes for spectrophotometers and electrophoresis baths.
Xenus high power servo amplifiers drive brush and brushless servo motors (to 7 hp), including modern linear motors. The amplifiers permit sinusoidal or trapezoidal motor commutation.
Design engineers struggling to meet product design and development deadlines can now obtain rapid injection molded parts faster and more cost-effectively than ever before, due to recent improvements in the company's proprietary rapid injection molding process.
For many high frequency designers building custom assemblies, maintaining tight pitch (<0.1 in.) between feedthrus is critical to layout and performance issues. The drawback of this tight pitch is that it sometimes results in excessive stress on the glass seal because of thermal expansion.
"Intelligent Control" Solid State Relay Assemblies can interface with a variety of control input signals. Rated for loads up to 100 A at a maximum 40°C ambient temperature, nine different models are available to meet the needs of a wide variety of applications.
Acrosser B1551 embedded computer completely support RTOS & WinCe. It's the 3.5 in. low power and fanless embedded single board computer with LAN, LCD, Voice, serial, USB, compact flash, DOC, and PC104 expansion. It has an 8 year life circle for medical device projects.
The DL3-PC utilizes a Posiflow rotary pump design which has no gears to wear and is resistant to abrasive fillers. Both pumps are driven by brushless AC motors. A key feature is touch pad programming of mix ratio and flow rates.
The Norgren KIP range of brass body valves can be specified with either brazed in fittings or tube ends and is ideal for OEM applications where leaks can simply not be tolerated. The customer can select from standard size fittings and tubes or the company can engineer a custom design to suit.
Plastic Welder™ SD (sandable) adhesive is ideal for bonding PPO, PVC, and various polyesters, polycarbonates, styrenics, and composites where filler material must be sanded to a smooth, nonporous finish.
Tough Air Filters are designed to withstand harsh environments, including those where high temperature, high humidity, chemicals, or solvents are present.
This 4.9-inch diagonal 1-DIN color active matrix TFT LCD offers an economical standard product for display designers involved in medical diagnostic instrumentation.
The L2S Bench Wire Stripper removes film insulations from round wires between 8-29 AWG (3.25-0.28 mmo) including enamel, Formvar, ML, armored poly-thermaleze and epoxy. A high-speed rotating insert quickly strips insulation from the surface of the wire.
Designed to be resistant to bacteria, Thermoplastic Elastomer (TPE) cords present an alternative to Neoprene and offer enhanced retractile properties not offered by PVC.