The Microtech MBD2 beam delivery system is designed for UV excimer lasers. It is an industrial-grade, large format system that is for 24/7 production in an industrial environment. It accommodates large-format beam delivery system modules.
The EZ-mix VR variable ratio meter, mix, and dispense system is a piston-based software-driven positive displacement system that provides accurate mixing without changing gears or other time-consuming mechanical adjustments.
The Universal Post and Clamp Assembly is a positioning system that consists of a base that attaches securely to any flat surface and a series of stepped and straight-through couplings that accept ½, 3/4, and 1 in. shafts.
A 1,000-hour EKE bulb is available for the fiberoptic FL3000 series 150 W halogen light boxes and light guides.
The DynoLAB LT low-cost complete turn-key system for electric motor testing offers the test control and data acquisition capabilities required for basic electric motor testing.
The E-Series of Temposonics magnetostrictive position sensors has been enhanced with the addition of a gradient upload capability to the digital pulse output model EP2.
The XRI-1200 is a PC-based digital image processing board specifically designed for demanding x-ray imaging applications where images often contain motion artifacts and exhibit low contrast, high-noise images significantly improving image quality and contrast.
The HL2 high intensity infrared heater is a lightweight, hand-held heater that provides portable heat for a variety of applications including plastics curing and forming and laboratory testing.
Mezzanine connectors have been added to the AirMax VS product offering to complement the shieldless high-speed backplane connector family. Available in stack heights ranging from 12.
Felo brand adjustable torque limiting screwdrivers enable the torque to be set at the top of the handle and will release once the torque level has been reached. Three models cover a torque range from 5.3 to 47.8 in. pounds. Handle only limits torque when rotated clockwise.
The Lasair II 350L counts particles as small as 0.3 microns while sampling at 50 LPM. The higher flow rate samples one cubic meter in only 20 minutes. The software walks the user through the full certification process and then automatically generates a full final report.
The filtered C20 inlet power entry module is intended for medical equipment applications where the combination of filtering and AC power entry for detachable C19 cordsets in one component is advantageous. The module is configured with an IEC 60320-1-1 C20 inlet and a filter.
Combining several advanced technologies, the IP67-rated coolant proof SuperSolar digital caliper offers ease of use, convenience, and shop hardness.
A series of anti-backlash nuts are designed for applications that require precise positioning as they eliminate the minimal backlash between the lead screw and nut interface on external linear actuators.
BTF absolute wire draw encoders provide resolution up to 0.025 mm and are designed for measuring lengths up to 50 m. The combination of the wire draw mechanism and absolute encoder enables made-to-measure solutions for almost any application profile.