A range of keylock switches provide protection against unauthorized access and offer higher levels of safety control. They are constructed from high quality materials and tested rigorously to meet many international standards.
PTFE Conductive Tubing is offered with a conductive ID that conforms to AMS-H-27267, having a minimum conductance of 10 to 20 micro-amps with 1,000 vdc applied over a 14 in. length. The tubing is designed to eliminate the build-up of statue charges that might damage sensitive electronic devices.
The TSW and TSW2 models provide a simple means to monitor a single temperature. Thermal specifications range from 0°C to 150°C for the TSW and -40°C to 125°C for the TSW2. The TSW3 monitors a custom-specified temperature range or window from -40°C to 125°C.
SP-45 is a PTFE-based material that has been proven biologically compatible for use in medical equipment seals. Tests conducted per ISO-10993 concluded that SP-45 meets requirements for “unlimited use on intact surfaces,” “limited use on mucosal membranes,” and is “not a sensitizer; non-irritant.
The high-precision Ball Rail System greatly reduces rolling, pitching, yawing deviations in linear guideways due to ball recirculation. The result is extremely smooth motion with virtually no deviation in the X, Y, or Z direction.
The Type VLA Actuator has fewer components and a lower overall cost by using an LM Guide for its base. Long-term cost savings are also realized through the Type VLA’s incorporation of patented Caged Technology, a QZ Lubricator, and electro-mechanical components.
The Japanese socket strip is rated for a maximum 15 amps with service at 125 VAC. It is configured with six outlets, a lighted reset switch, and power cord of 2.07 meters.
The Surfex-300 is a parts cleanliness testing station for large parts. Smaller parts can also be tested.
With the mini-spool dispenser, customers can order RNF-100 heat-shrinkable tubing in lengths from 15 to 100 feet, depending upon the size selected. Customers can cut lengths right from the mini-spool dispenser to meet their requirements.
The Series 116 Vertical Flow Filter Modules can install on top of a support frame or be hung below the cleanroom ceiling, drawing air from the room or a return air duct. They are self-contained with filters, lights, and blowers. Frefilters may be located on top or at the front of the units.
The 450 VA rated M4L-1-4, M4L-2-4, and M4L-3-4 power isolation transformers are for use in providing reinforced isolation between mains supply and sensitive electronic equipment.
The 2600-003 Series positive-displacement metering valve is designed to dispense precisely repeatable, small-volume shots of low- to high-viscosity adhesive and sealant materials and lubricants.
The SKS 36 SinCos Motor Feedback System with Hiperface interface is more than a small version of a conventional rotary encoder. Its construction is fundamentally different, with a minimum number of components to open the door to the production of truly miniaturized rotary encoders.
The Swivel EMI Adapters help mechanical designers and electrical engineers achieve effective electromagnetic interference (EMI) shielding, while adding valuable flexibility, functionality, and greater convenience to existing cable management.
By incorporating spacers between the balls and plastic tubes in the recirculating channels, this company has succeeded in producing a ball nut—the UltraSpeed KES—specifically designed for applications demanding high speed capability as well as consistent pulsation-free motion at slow speeds.