The 000-0222 brushless DC motor is designed for low voltage operation where economy and a standard NEMA 23 interface are requirements. Designed with an operating voltage of 12 volts, this motor is capable of delivering 25 oz-in continuously or in excess of 80 oz-in peak torque.
The GJ Series is available with ceramics, Nickel Carbide, hardened stainless steel, and other wear-resistant materials.
Concave Cylindrical 5.0 mm (T1-3/4) Discrete LEDs (Light Emitting Diodes) emit light that is as bright at its edges as it is in the center. Concave lenses improve the quality of the light beam by spreading out the collimated beam of light that LEDs typically emit.
PITTMAN® ELCOM SL® brushless DC servo motors feature a slotless stator design offering key performance advantages compared with conventional slotted technology.
SI® threaded inserts provide strong, reusable metal threads in plastics to enable subsequent access to assemblies when required. These brass, stainless steel, or aluminum threaded inserts serve as practical alternatives to permanent joining methods, such as adhesives or rivets.
The 323Dz pump is offered for high precision dispensing. Designed with the 313D flip-top pumphead
The Micropulse ProSet4, designed for hydraulic cylinder position sensing, has four built-in programmable setpoint outputs for detection of end-of-stroke or any position in between.
The T3000 data acquisition system is a complete turnkey solution designed to support up to 10,240 sensors (individually or in multiple sensor arrays) at acquisition rates of up to 128 kHz, enabling real-time tactile pressure analysis of objects in direct physical contact.
This syringe heater offers a drug delivery solution designed to ensure precise liquid temperatures and reduce fluid viscosity—two features that maximize patient comfort and decrease risk.
Both the qfp|module and the mlf|module are fully automated measurement solutions and eliminate the need for an operator to determine pass/fail criteria.
Designed to test tensile, compression, flexural, and peel properties of a wide variety of materials, the 3300 Series is a cost-effective mechanical tester.
The Cincinnati Test Systems Standards Lab produces high quality leak standards. The A2LA accredited lab follows strict calibration procedures to ISO 17025 standards. The certified calibrations are traceable to NIST flow and leak standards.
Designed for automated test or bench top use, the Guardian 1050 provides current to 45 Amps to meet the most stringent standards, and the economical Sentry 50 Plus provides current to 30 Amps for less demanding applications.
This generation of hand-held, RF Signal Strength Analyzers features 2.9 GHz bandwidth, -117dB/m max sensitivity, and a scan rate of 125 channels/sec.
Durable, PTFE coated precise forming mandrels are offered for manufacturing small diameter parts including extruded tubing and formed rubber bladders. The PTFE Natural™ Fluoropolymer Mandrels feature a uniform, non-flaking PTFE coating on stainless steel or nitinol wire.