Advertisement
Product Releases
Subscribe to MDT Magazine Product Releases
View Sample

FREE Email Newsletter

MDT Daily

Metering Pumps

September 3, 2004 5:50 am | Hydra-Cell Industrial Pumps | Comments

D10 Series Metering Series Pumps offer &#1771% steady state accuracy, repeatability, and linearity, along with ease of installation and rugged construction, making them suitable for a variety of industrial metering applications and environments.

Wire EDM

September 3, 2004 5:50 am | Methods Machine Tools, Inc. | Comments

Fanuc i C Series Wire EDM machines are available in five models with Z-axis heights to 16 in.

Interlock Package

September 3, 2004 5:50 am | Comments

The EC Series Electrically Coded Interlock Switch and Control Unit consists of a uniquely coded actuator, a read head (switch), and a control unit capable of monitoring up to four switches for applications with up to four guard doors.

Advertisement

CAN Microcontroller

September 3, 2004 5:50 am | Microchip Technology Inc. | Comments

Four CAN (Controller Area Network) PIC&reg Flash microcontrollers, including the world's largest memory 8-bit CAN microcontroller in a 28-pin package, combine the innovative ECAN&#153 module, Enhanced Flash memory, and nanoWatt Technology power management into a very small form factor.

Polyester Film

September 3, 2004 5:50 am | Comments

TM9720 is found in medical devices where skin contact is possible, such as surgical drapes, various diagnostic sensors, and dental dams.

TOPICS:

Mini-Circulator

September 3, 2004 5:50 am | Torrey Pines Scientific, Inc. | Comments

The EchoTherm&#153 Model CB20 Constant Temperature Chilling/Heating Mini-Circulator is designed for use with small volume sample holders like water jacketed cuvettes for spectrophotometers and electrophoresis baths.

Servo Amplifier

September 3, 2004 5:50 am | Copley Controls Corp. | Comments

Xenus high power servo amplifiers drive brush and brushless servo motors (to 7 hp), including modern linear motors. The amplifiers permit sinusoidal or trapezoidal motor commutation.

Rapid Injection Molded Parts

September 3, 2004 5:50 am | Proto Labs, Inc. | Comments

Design engineers struggling to meet product design and development deadlines can now obtain rapid injection molded parts faster and more cost-effectively than ever before, due to recent improvements in the company's proprietary rapid injection molding process.

Advertisement

Mini DC Feedthrus

September 3, 2004 5:50 am | Comments

For many high frequency designers building custom assemblies, maintaining tight pitch (&lt0.1 in.) between feedthrus is critical to layout and performance issues. The drawback of this tight pitch is that it sometimes results in excessive stress on the glass seal because of thermal expansion.

Solid State Relay Assemblies

September 3, 2004 5:50 am | Hbcontrols, Inc. | Comments

"Intelligent Control" Solid State Relay Assemblies can interface with a variety of control input signals. Rated for loads up to 100 A at a maximum 40&#176C ambient temperature, nine different models are available to meet the needs of a wide variety of applications.

TOPICS:

Embedded Computer

September 3, 2004 5:50 am | Acrosser U.S.A. | Comments

Acrosser B1551 embedded computer completely support RTOS & WinCe. It's the 3.5 in. low power and fanless embedded single board computer with LAN, LCD, Voice, serial, USB, compact flash, DOC, and PC104 expansion. It has an 8 year life circle for medical device projects.

Filter End Cap Potting

September 3, 2004 5:50 am | Gusmer/Decker | Comments

The DL3-PC utilizes a Posiflow rotary pump design which has no gears to wear and is resistant to abrasive fillers. Both pumps are driven by brushless AC motors. A key feature is touch pad programming of mix ratio and flow rates.

Brazed In Fittings

September 3, 2004 5:50 am | Norgren Inc. | Comments

The Norgren KIP range of brass body valves can be specified with either brazed in fittings or tube ends and is ideal for OEM applications where leaks can simply not be tolerated. The customer can select from standard size fittings and tubes or the company can engineer a custom design to suit.

Sandable Adhesive

September 3, 2004 5:50 am | Devcon | Comments

Plastic Welder&#153 SD (sandable) adhesive is ideal for bonding PPO, PVC, and various polyesters, polycarbonates, styrenics, and composites where filler material must be sanded to a smooth, nonporous finish.

Air Filter (1129)

September 3, 2004 5:50 am | Universal Air Filter Co. | Comments

Tough Air Filters are designed to withstand harsh environments, including those where high temperature, high humidity, chemicals, or solvents are present.

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading