Advertisement
Product Releases
Subscribe to MDT Magazine Product Releases

Ball Valves Require Less Power, Provide Smaller Footprint

February 14, 2014 3:42 pm | by MDT Staff | Comments

Clark Solutions has introduced the 8P Series of Direct Mount Pneumatic Actuated Ball Valves. Available in 18 brass or stainless steel models with 2-way or 3-way configurations and 1/4" to 4" pipe sizes, 8P Pneumatic Actuated Ball Valves can be customized by original equipment manufacturers to meet the requirements of virtually any application.

Silicone Cable Assembly Solutions

February 14, 2014 3:38 pm | by MDT Staff | Molex | Comments

Molex Incorporated has introduced MediSpec silicone cable solutions from Affinity Medical. Reusable and ergonomic MediSpec silicone overmolded cable and interconnect assemblies deliver high reliability and performance in medical applications, including endoscopy, ophthalmic lasers, surgical power tools and other operating room instruments...

Commercial-off-the-Shelf Crimp Pins

February 14, 2014 3:27 pm | by MDT Staff | Mill-Max Mfg. Corp. | Comments

Mill-Max Mfg. has announced the addition of new crimp pins to our selection of wire termination products. These new pins are commercial-off-the-shelf (COTS) equivalents to the popular Mil-Spec M39029 crimp pins. If your application does not require Mil-Spec components but demands the same reliability and form factor, then these pins will fit the bill perfectly...

Advertisement

Incredibly Small Liquid Flow Sensors

February 14, 2014 3:14 pm | by MDT Staff | Sensirion Inc. | Comments

Swiss sensor manufacturer Sensirion AG has announced the launch of the new liquid flow series LPP10 and LPG10 in an unsurpassed small size. The new technology is based on planar microfluidic substrates and the sensors are available with a glass (LPG10) or a plastic (LPP10) packaging...

Interior Permanent Magnet Brushless Motors

February 14, 2014 3:06 pm | by MDT Staff | Applimotion, Inc. | Comments

Applimotion’s ULT, UTH, UTS, and UTO frameless motor kits cover a wide range of applications in direct drive motion control with their large through-hole surface permanent magnet (SPM) rotor configurations. Applimotion is now offering interior permanent magnet (IPM) versions of these motor kits extending capabilities to new applications...

Circuit Breaker for PCB Mounting

February 14, 2014 2:58 pm | by MDT Staff | Schurter, Inc. | Comments

Schurter’s T9 fuseholder style thermal circuit breaker series is now expanded to include Model T9-818 for PCB mounting. The new model complements the existing T9 series assortment for panel mounting, providing a complete range of mounting styles equivalent to closed fuseholders...

New Slip-Ease Clutches Offer Improved Backlash

February 14, 2014 2:48 pm | by MDT Staff | Comments

Sterling Instrument offers a new, low backlash variant on its existing line of multi-plate in-line slip clutches. Both versions feature an all mechanical design, which makes them considerably cheaper than electro-mechanical alternatives. The slip plates are layered with friction pads in between...

Pins Offer Alternative to Screws in Compact Electronics

February 13, 2014 5:04 pm | by MDT Staff | Comments

New microPEM TackSert pins introduce reliable fastener solutions to attach top panels securely to a base panel or chassis in compact electronic assemblies. These pins provide practical alternatives to micro screws by eliminating the typically costly issues associated with threaded hardware...

Advertisement

High Capacity Tension, Compression Force Tester

February 13, 2014 4:56 pm | by MDT Staff | Mark-10 Corporation | Comments

Mark-10 has introduced their new Model ESM1500 force tester, a highly configurable single-column force tester for tension and compression measurement applications up to 1,500 lbF (6.7 kN). Suitable for laboratory and production environments, the ESM1500 may be used with an indicator-load cell combination or with a force gauge...

Automated Precision Dispensing Options at MD&M

February 13, 2014 4:49 pm | by MDT Staff | Nordson Corporation | Comments

Nordson EFD announced that it will exhibit in Booth #2911 at the upcoming MD&M West Conference and Expo, from February 11-13, 2014 at the Anaheim Convention Center in Anaheim, CA. Nordson EFD's technical experts will showcase a range of advanced fluid dispensing systems...

TOPICS:

Low Energy Wireless Monitoring Sensors

February 13, 2014 3:56 pm | by MDT Staff | Parker Hannifin Corp. | Comments

Parker Hannifin Corporation has introduced a low energy wireless sensor platform for monitoring pressure, temperature, and humidity in liquid and gas applications. Parker’s SensoNODE Low Energy Wireless Monitoring Sensors and SensoNODE mobile iOS application are the first in a family of products the company is launching in 2014...

TOPICS:

Power-to-Board Connector Provides High Current Single-Point of Connection

February 12, 2014 4:48 pm | by MDT Staff | Amphenol Corp. | Comments

Amphenol Industrial Products Group has expanded its line of RADSOK high current connectors with a new power-to-board connector. PowerBlok WTB (wire-to-board), a simple and cost effective latching connector, provides a high current single-point of connection to a PCB of up to 70 A...

EMI Shielding Material for Precision Die-Cuts

February 12, 2014 4:39 pm | by MDT Staff | Leader Tech Inc. | Comments

Many electronic enclosures have gaps that allow unwanted RF and electromagnetic interference to escape into the surrounding environment. These openings are commonly found around the I/O panel, backplane and access panels of the enclosure...

Medical Materials Innovation Showcasing at MD&M West 2014

February 12, 2014 4:31 pm | by MDT Staff | Henkel Electronic Materials, Llc | Comments

At the MD&M West event in Anaheim, California, the Electronics Group of Henkel will show visitors why it is the leading materials innovator for medical device manufacture. From booth #453, Henkel will showcase some of its most recent materials developments...

TOPICS:

Interconnect Products Offer Advanced Technology Solutions

February 12, 2014 4:19 pm | by MDT Staff | Molex | Comments

Molex is committed to helping medical design engineers meet the growing demand for smaller, more portable devices without sacrificing performance and reliability. The company will showcase a wide range of its advanced products at MD&M West, February 11–13, Anaheim, CA, Booth 1746, including customized interconnects...

TOPICS:

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading