QuickChange Pump Heads provide convenience and modularity for managing multiple fluids with Travcyl™ Systems. The pump head component of the Travcyl fluid handling system quickly detaches from the motor/driver and is replaced with a spare QuickChange Pump Head in seconds.
Designed for harsh environments, the IP 68-rated, 6-position, high voltage push-pull connector is available with six high voltage contacts each having 3.5 kV operating voltage. Termination is soldercup on the plug side and PCB or soldercup on the receptacle side.
Permabond 940 are non blooming, low odor adhesives designed to bond plastics, rubber, and metal and are best suited for applications that are appearance sensitive. Common cyanoacrylates can cause a white frosting on the surface of the components surrounding the bond site.
Unbacked Hi-Flow™ Plus 110 and 135 membranes are offered for high protein binding in lateral flow diagnostic assays. The membranes are intended for sensitive rapid diagnostic test kits, including infectious disease, drugs of abuse, cardiac markers, and other analytes.
This epoxy is a unique two-component, room temperature curing, high temperature resistant adhesive called EP35. It produces high strength bonds whose strength is maintained even after long exposures to temperatures in the 450°F to 500°F range.
The MiniProtect MP2100 Protective Light Curtain provides reliable, cost effective Type 2 guarding on equipment where low risk factors have been assessed. The control circuitry is housed within the transmitter and receiver. No separate control box is required.
These 1/3 in. Drive Hex Keys are made entirely from stainless steel and are designed for repeated autoclaving. Designed for use in applications that require precise torque measurement, these keys can be used directly with a torque wrench or any standard square drive.
Ceramic and coating materials offer high-wear resistance, inert surfaces, and superior dielectric strength, resulting in extended product life and reduced costs.
The clean, modular cantilever design and smooth surfaces of the TFS 80-2 enable the machine to exceed cGMP standards by allowing for effortless and thorough cleaning.
Cast-X Series 1000 circulation heaters provide a safe heating method for volatile, viscous, or mildly corrosive liquids. The heaters provide accurate and consistent temperature control, are designed for greater durability, and are more compact than traditional heat exchangers.
Clamps and rings are offered for medical applications, which are deisgned for outside diameters as small as 2.5 mm to ensure leak-free sealing and fastening solutions. They are suitable for hose supply lines with chemicals, ink, liquids, and gases. The clamps are vibration proof.
Offering a high level of accuracy, comfort, and convenience is the Leica FS C comparison macroscope for real time comparison, quality control, and medical device inspection.
This drop-on-demand ink-jet printer—the Jet-A-Mark S.C.I. F.I.™ 3400—replaces the older 3200 model and is offered with new Windows-style software. The 3400 prints 1-5 lines up to 60 dpi, is flexible and reliable, and requires no special shutdown/startup procedures.
The economical F-51451 Series of 8.1-inch diagonal LCDs feature chip-on-glass construction, minimum 50,000-hour lamp life, and are available in two display modes.