Product Releases
Dispensing Pump
September 3, 2004 5:50 am | Watson Marlow Pumps Group | CommentsThe 323Dz pump is offered for high precision dispensing. Designed with the 313D flip-top pumphead
Position Sensor
September 3, 2004 5:50 am | Balluff Inc. | CommentsThe Micropulse ProSet4, designed for hydraulic cylinder position sensing, has four built-in programmable setpoint outputs for detection of end-of-stroke or any position in between.
Data Acquisition System
September 3, 2004 5:50 am | Pressure Profile Systems, Inc. | CommentsThe T3000 data acquisition system is a complete turnkey solution designed to support up to 10,240 sensors (individually or in multiple sensor arrays) at acquisition rates of up to 128 kHz, enabling real-time tactile pressure analysis of objects in direct physical contact.
Syringe Heater
September 3, 2004 5:50 am | Watlow Electric Manufacturing Company | CommentsThis syringe heater offers a drug delivery solution designed to ensure precise liquid temperatures and reduce fluid viscosity—two features that maximize patient comfort and decrease risk.
X-Ray Inspection Software
September 3, 2004 5:30 am | CommentsBoth the qfp|module and the mlf|module are fully automated measurement solutions and eliminate the need for an operator to determine pass/fail criteria.
Material Testing
September 3, 2004 5:30 am | Instron | CommentsDesigned to test tensile, compression, flexural, and peel properties of a wide variety of materials, the 3300 Series is a cost-effective mechanical tester.
Leak Detection
September 3, 2004 5:30 am | CommentsThe Cincinnati Test Systems Standards Lab produces high quality leak standards. The A2LA accredited lab follows strict calibration procedures to ISO 17025 standards. The certified calibrations are traceable to NIST flow and leak standards.
Ground Bond Testers (1055)
September 3, 2004 5:30 am | Quadtech, Inc. | CommentsDesigned for automated test or bench top use, the Guardian 1050 provides current to 45 Amps to meet the most stringent standards, and the economical Sentry 50 Plus provides current to 30 Amps for less demanding applications.
RF Signal Strength Analyzer
September 3, 2004 5:30 am | Protek Test & Measurement | CommentsThis generation of hand-held, RF Signal Strength Analyzers features 2.9 GHz bandwidth, -117dB/m max sensitivity, and a scan rate of 125 channels/sec.
PTFE Coated Forming Mandrels
September 3, 2004 5:30 am | Applied Plastics Co. Inc. | CommentsDurable, PTFE coated precise forming mandrels are offered for manufacturing small diameter parts including extruded tubing and formed rubber bladders. The PTFE Natural™ Fluoropolymer Mandrels feature a uniform, non-flaking PTFE coating on stainless steel or nitinol wire.
Plastics Color Effects
September 3, 2004 5:30 am | Bayer Materialscience, Llc | CommentsCompany offers six Leda® compounded color effects—Silverado, Black Starlight, Heart's Desire, Fade-to-Black, Titanium, and White Marble—to meet the unique requirements of design industries. These further expand the palette of the company's Fantasia™ colors and special effects program.
Metal Matrix Composite
September 3, 2004 5:30 am | Cps Corp. | CommentsAlSiC (Aluminum Silicon Carbide) substrates are ideal for power supply substrate applications, including carrier plates and heatsink materials for medical equipment power supplies. Applications include electronic detectors in NMRI and MRI systems and high RPM elements in CT scanners.
Sputtered Thin Films
September 3, 2004 5:30 am | Techni-Met, Llc | CommentsVacuum sputtered thin films are produced to serve specialized medical electronic product applications. Precision single and multiple-layer thin film depositions are designed to provide functional conductive, shielding, optical, protective, electroluminescent, and reflective properties.
Medical Foam
September 3, 2004 5:30 am | Rynel, Inc. | CommentsRynel, Inc. has developed a molding process that allows its bio-compatible foam to be formed into small, highly-detailed, three-dimensional components.
Clean Room Manufacturing
September 3, 2004 5:30 am | Ibs-Integrated Biosciences Inc. | CommentsIBS offers clean room contract manufacturing of medical devices and automated equipment to companies seeking a better return on their investment from mature or early stage development products.
