Product Releases
Subscribe to MDT Magazine Product Releases
View Sample

FREE Email Newsletter

MDT Daily

Photodetector (1591)

December 6, 2004 7:30 am | Comments

The UDT-4X4D line of superblue enhanced photodetectors is designed to provide virtually complete isolation between all of the 16 elements with an extremely low crosstalk level (less than at 0.05% at 633nm).

Cartridge System

December 6, 2004 7:30 am | Comments

This closed end cartridge system offers good quality at a significant cost savings. The complete system provides a lower cost, based on the reduced number of components to buy, and the elimination of labor to assemble them.

Ball Bearings

December 6, 2004 7:30 am | Comments

SKF Explorer deep groove ball bearings benefit from advanced design, material, and manufacturing-process innovations to achieve smooth and quiet operation, high running accuracy, increased speed capability, lower friction and operating temperatures, and longer service life.


Miniaturized Tube and Rods

December 6, 2004 7:30 am | Comments

Custom rod and tube components are available in diameters from 0.032 in. to 1.25 in. and made from stainless steel, titanium, inconel, and other exotic metals.

Dispense Needles

December 6, 2004 7:30 am | Comments

This prepackaged selection of 115 dispense tips are offered in a variety of styles, lengths, and gauge sizes for all syringe and automated valve-type adhesive dispensing. All dispense tips feature threaded hubs for improved locking.

Anti-Static Packaging

December 6, 2004 7:30 am | Comments

PELASPAN-PAC Anti-Static provides optimal cushioning for a wide range of electronic parts and components, protecting them from static discharge during shipment. The pink, s-shaped polystyrene material is free-flowing, which cuts packaging time.

Blow Molding System

December 6, 2004 7:30 am | Comments

These turnkey co-injection blow molding systems are designed specifically to produce multiplayer bottles and packaging for medical/pharmaceutical applications.

Geared Motors

December 6, 2004 7:30 am | Comments

The three-phase BG Series helical geared motors are engineered to drive machines and equipment of all types. The BG Series come as a standard two-stage design and offers simple installation with a wide range of mounting options.


Spore Strips

December 6, 2004 7:30 am | Comments

Standard spore strips are 38 mm x 6.0 mm, making them difficult to use in lumens or other small areas. At 2.0 mm x 10 mm, micro-Strips can be used in areas where other BIs are too large.

UV Cure Systems

December 6, 2004 7:30 am | Comments

The SuperSpot MAX HP has been coupled with the company’s proprietary extreme intensity FibreFire UV fiber delivery products to create a line of matched precision UV cure systems for automated & semi-automated medical applications.


December 6, 2004 7:30 am | Comments

The R101 is a bipolar driver/controller capable of output current ranging from 0.2 to 2.5 amps/phase with step resolutions from full, 1/2, 1/4, and 1/8. This product can be configured and controlled via a simple RS485 communications bus or step and direction inputs.

Hand Press

December 6, 2004 7:30 am | Schmidt Technology Corp. | Comments

The precision Hand Press 307/3000 System offers integrated process and electronic stroke control. Designed for complex assembly and lean manufacturing cells requiring short runs and press forces up to 900 lbs., this cost-effective System offers 100% process verification and SPC.



December 6, 2004 7:30 am | Qosina | Comments

Large Bore Touhy Borst Adapters accommodate a wide range of catheter sizes up to 18 French. Both have a crystal clear polycarbonate body that makes it easy to observe flow. Turn the large, easy-to-control cap to adjust the size of the orifice in the silicone gasket.

Flexible Cyanoacrylates

December 6, 2004 7:30 am | Comments

Two flexible cyanoacrylate adhesives are offered for bonding delicate, soft, or flexible medical substrates. Both Loctite 4851 and Loctite 4861 Prism instant adhesives are ISO-10993 biocompatibility compliant.

Machining System

December 6, 2004 7:30 am | Comments

The Multifast is a modular, rotary table machine that grows with the user's production requirements and adapts itself, problem-free, to changing machining operations and lot sizes.


You may login with either your assigned username or your e-mail address.
The password field is case sensitive.