Advertisement
Product Releases
Advertisement

Thermoplastic Elastomer Compounds Form Excellent Bond With High-Density Polyethylene

Tue, 02/09/2010 - 4:12am


Innovation at Teknor Apex Company (MD&M West Booth 2115) has yielded thermoplastic elastomer (TPE) compounds with double the adhesive strength of standard TPEs when over-molded onto high-density polyethylene (HDPE) substrates.

Teknor Apex will use the technology to custom-compound TPEs in its Medalist range of medical-grade elastomers, according to Nick Sandland, senior market manager. “While device manufacturers are increasingly turning to multi-shot injection molding as a way to eliminate assembly, the existing ‘off-the-shelf’ TPEs available to them exhibit limited adhesion when over-molded into HDPE substrates,” Sandland said. “New formulation technology enables Teknor Apex to custom-compound TPEs that not only provide stronger bonds to HDPE, but also exhibit far less variation in bond strength, yielding a more consistent product.”

Teknor Apex expects to apply the new HDPE-bonding technology across the range of TPE polymer types available in the Medalist product range, and can develop compounds for a wide range of applications. HDPE is commonly used in medical products because of its low level of extractables or leachables, resistance to many chemicals, and affordability. TPEs are typically over-molded onto rigid HDPE to serve as seals for vials and other fluid-storage vessels, and for connectors.

In a widely used 180-degree peel adhesion test, Teknor Apex compared HDPE samples over-molded with an HDPE-bonding Medalist TPE and samples with one of the company’s own standard hydrogenated styrenic block copolymer (HSBC) TPEs. The median adhesion, or peel strength, of the Medalist TPE was twice as great as that of the HSBC: 42.086 pounds per linear inch versus 21.412. In addition, the variation in peel strength among different test samples was less than half as great with Medalist as with HSBC. “The failure mode exhibited by the HSBC was adhesive, which means that failure took place at the interface between the TPE and the HDPE,” Sandland said. “In contrast, the failure mode of the Medalist TPE was cohesive—the TPE itself tears before the bond to HDPE fails.”

While the high-strength bonding to HDPE is new to medical TPEs, it is an outgrowth of technology long used by Teknor Apex for TPE cap liners for beverage bottles, an FDA-regulated application in which the TPE bonds to the inside of a rigid screw cap, typically molded of HDPE. The Medalist program for medical manufacturers includes a range of 33 standard high-purity elastomer compounds along with a comprehensive body of tools and information for designers and processors. Compounds are available with Shore A hardness from 5 to 87 and include clear, translucent, and opaque formulations.

Advertisement

Share this Story

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading