Product Releases

Ultra Compact Converter Range In 15 And 30 Watt Versions

Fri, 08/20/2010 - 7:16am
Ultra Compact Converter Range In 15 And 30 Watt VersionsXP Power announced additions to its extensive range of ultra compact low power DC/DC converters. The 15 Watt JCM15 comes in a tiny 1 x 1 in. metal package, with the 30 Watt JCK30 being available in a metal case that measures just 2 x 1 in. These encapsulated PCB mounted converters accommodate a wide 2:1 input voltage range, accepting either 9 to 18, 18 to 36, or 36 to 75 VDC, covering the nominal inputs of 12, 24, or 48 VDC. Single output models provide 3.3, 5, 12, or 15 VDC, while the duals offer +/-5, +/-12, or +/-15 VDC. All outputs are fully regulated to within +/- 0.5% over all input and load conditions for the single output models and less than +/- 1.0% for the dual outputs.

The JCK30 can operate at full output power from -40 to 50°C, and the JCM15 up to 65°C, without derating. With a maximum case temperature of 105°C, no additional heat sinking or forced airflow is required, making the converters suitable for most operating environments.

The convertors feature an input to output and input/output to case isolation of 1,600 VDC for up to one minute. Both models feature a remote on/off control line. This can be used to control the output rails or to sequence start-up procedures. All units feature overvoltage and continuous short circuit protection.


Share this Story

You may login with either your assigned username or your e-mail address.
The password field is case sensitive.