Advertisement
Product Releases
Advertisement

IR-Enhanced CCD Image Sensor

Mon, 12/06/2010 - 6:03am

LISTED UNDER:

IR-Enhanced CCD Image Sensor

Hamamatsu Photonics introduces the S11510 series of Full Frame Transfer CCD (FFT-CCD) image sensors with ultra high sensitivity in the NIR region. Utilizing Hamamatsu’s unique technology in laser processing, it is possible to form a MEMS structure on the back side of the CCD, which results in a much higher sensitivity at wavelengths longer than 800 nm.

The S11510 features quantum efficiency of 40% at 1,000 nm, without the need for a deep depletion structure, with its corresponding drawback of higher dark signal. The S11510 series is available with 1,024 or 2,048 pixels, with each pixel measuring 14 by 14 µm.

In addition to high IR sensitivity, the S11510 series can be used as an image sensor with a long active area in the sensor height direction. This can be achieved using binning, making them suitable for Raman spectroscopy. These sensors also feature low etalation, which is often a problem in Raman applications, where a smooth, stable output is very important.

The S11510 series is similar in design to the conventional S10420-01 FFT-CCD and the two are pin compatible allowing for operation under the same drive conditions. This makes for a simple way to improve the NIR sensitivity of an existing image sensor or spectrometer.

Advertisement

Share this Story

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading