Product Releases
LED Power Supply Suits Hand-Held Devices
May 2, 2013 3:40 pm | by MDT Staff | Bear Power Supplies | CommentsBEAR Power Supplies has introduced a compact, high-efficiency DC-DC converter for hand-held LED devices. The 10 x 20 mm power supply incorporates a microprocessor for programmable LED dimming. The LED power supply is designed for high-performance applications where reliability is critical...
Small Profile Optical Encoder
May 2, 2013 3:13 pm | by MDT Staff | Heidenhain Corp. | CommentsThe new RSF MS 14 encoder system fulfills the need for a small package, high resolution encoder that has a repeatable optical reference mark, along with an easy visual display of signal quality. Available in North America through parent company HEIDENHAIN Corporation, this frictionless kit style encoder is perfect for motion feedback applications...
Compact Lasers Portfolio for Bioinstrumentation
May 2, 2013 12:59 pm | by MDT Staff | Newport Corporation | CommentsSpectra-Physics, a Newport Corporation brand, announced the expansion of the Excelsior One continuous wave (CW) lasers series. Three new wavelengths of 515, 553, and 594 nm have been added, resulting in a total of 14 wavelengths available from the Excelsior One platform of compact, integrated lasers.
New Capacitive Level Sensor for Non-Contact Detection of Challenging Fluids
May 1, 2013 3:30 pm | by MDT Staff | Gems Sensors Inc. & Controls | CommentsThe new CAP-100 Series Capacitive Liquid Level Sensors from Gems Sensors & Controls offers accurate level sensing through the walls of a wide variety of bottle types including plastic, glass, and fiberglass. These compact sensors are ideally suited for medical applications such as waste, reagent, buffer or diluent as well as dark, sticky or viscous fluids.
Hypodermic Needles for Inclusion in Custom Kits
May 1, 2013 3:05 pm | by MDT Staff | B. Braun Oem Division | CommentsB. Braun OEM now offers hypodermic needles and Safecan Safety Introducer Needles, for inclusion in custom kits. The hypodermic needles are available in a wide range of gauges and lengths. They feature a smooth surface with a light silicone coating and a sharp, tri-beveled profile designed to promote ease of penetration.
Diluting and Proportional Fluid Control with ±1% Precision
May 1, 2013 1:01 pm | by MDT Staff | Fmi | CommentsThe STH and STQ Duplex metering pumps from Fluid Metering are ideal for precision mixing, diluting, and proportional metering for OEM medical, analytical, and industrial instrumentation. FMI’s OEM Duplex Metering Pumps consist of two FMI valveless pump heads direct coupled to a single variable stepper motor drive.
Brushed Chrome Option for IP65 Rated Pushbuttons
April 30, 2013 5:28 pm | by MDT Staff | Nkk Switches | CommentsNKK Switches, the world’s leading designer and manufacturer of innovative electromechanical switches, today announced it has updated its YB2 Series of 24mm square and 25mm round tamperproof pushbuttons. New to the series is a brushed chrome cap and bezel option for non-illuminated models.
From Almost Invisible to 1.0mm Thick Foils for Research Applications
April 30, 2013 5:23 pm | by MDT Staff | Goodfellow Corporation | CommentsFoils as thin as 0.00025mm are among the many foils available from Goodfellow for research and product development. More than 50 pure metals and approximately 100 alloys are represented in the company’s full line of foils, with some of them – rolled or deposited in Goodfellow’s own production department – not available from any other supplier.
Engineered Metal Solutions to Showcase at MD&M East Exposition
April 30, 2013 4:56 pm | by MDT Staff | CommentsATW Companies will be highlighting its leadership in engineered metal solutions for medical devices at the MD&M East Exposition, Booth #3434 from June 18-20, 2013 at the Pennsylvania Convention Center in Philadelphia, Pennsylvania.
Foil on Ceramic Carrier Current Sense Chip Resistors
April 30, 2013 4:35 pm | by MDT Staff | Stackpole Electronics, Inc. | CommentsStackpole announced the release of the CSRF0603 and CSRF0402 sizes to add to their broad current sense resistor product group. The CSRF0603 is available in resistance values from 5 to 10 milliohms in 1% tolerance and 75 ppm TCR.
Ultra-Compact Dual/Quad Axis Universal Drive Module
April 29, 2013 5:27 pm | by MDT Staff | Acs Motion Control | CommentsACS Motion Control has developed a unique addition to the SPiiPlus EtherCAT Control Solution family. The SPiiPlusUDMlc, or UDMlc, is a compact EtherCAT dual/quad axis drive, designed to meet the needs of OEMs designing control systems for motion demanding equipment which utilize small motors.
Right-Angle Spring-Loaded Connectors with Long Stroke Option
April 29, 2013 4:25 pm | by MDT Staff | Mill-Max Mfg. Corp. | CommentsMill-Max has added a second version to their 829 series single-row, right-angle, spring-loaded connectors. The new connector, 829-22-0XX-20-002101, has an increased mid-stroke distance of .045” (.090” full stroke) –providing more flexibility and tolerance for your assembly.
Air Reservoirs Include Manifolds and Corrosion Resistant Designs
April 29, 2013 1:09 pm | by MDT Staff | Bimba Manufacturing Company | CommentsBimba Manufacturing announced today the addition of three new series of air reservoirs to complement the existing Original Line design. The models in this line have been equipped with stainless steel and Delrin end caps to provide a solution for working in corrosive environments.
Stainless Steel Couplings Provide Twice the Torque Capacity
April 26, 2013 4:54 pm | by MDT Staff | Helical Products Co. | CommentsHelical’s 17-4PH stainless steel couplings are ideal when high strength, excellent fatigue resistance and high torsional stiffness are called for in an application. Helical is the only company offering a standard product line of beam couplings made of 17-4PH stainless steel.
Enhanced Roboshot All-Electric Injection Molding Machine
April 26, 2013 3:33 pm | by MDT Staff | CommentsMilacron Plastics Technologies, a worldwide supplier of plastics-processing technologies, continues to offer the enhanced and top-selling Roboshot all-electric injection molding machine. New improvements to the machine offer customers unprecedented flexibility in their molding process.
