A miniature metering valve is offered with stops and locking mechanism. It is based upon the “MIL-MV-XX” metering valves. The addition of mechanical stops allows users to positively position the sleeve in either the full on or full off position.
The TY Series Linear Actuator is designed to reach super high speeds of up to 5 m/sec. and accelerations up to 5 Gs. Integrated with the Type SHS LM guide, as well as the QZ lubricator, the TY Series operates long-term and maintenance-free. It features a compact cross section.
Limfast Liquid Injection Molding is a service offered for molding custom medical liquid silicone rubber components and bonded Silicone to metal or plastic components, delivered in prototype quantities within 10 working days.
Koganei Blow-Type Ionizers are designed to remove static electricity with pinpoint accuracy in a broad range of applications.
The Sheet E/C5 Jumper cordsets are for equipment rated 2.5 amps with service up to 250 VAC. The cordsets have North American and European approval. They are available with an IEC 60320 Sheet E plug connector, 3 x 0.75 mm 2 /18 AWG universal cable, and an IEC 60320 C5 connector.
The OTTO P5-V switch offers the functionality of the P5 alternate action switch with the added benefit of an aluminum security level case and button or a stainless steel vandal proof case and button. Push and the P5-V series switch holds “on”; push again and the switch turns “off.
A range of miniature couplings are offered as small as 1/4 in. diameter to suit shaft sizes down to 3/32 in. The one-piece unit has zero backlash and can transmit rotational torque in angular, parallel, and/or skewed modes.
This R-Series analog sensor provides enhanced sensing performance along with extended functionality and programmability. It includes fully programmable dual channel outputs for simultaneous position and velocity, or dual magnet position, all within the same compact sensor envelope.
The Project: An innovative design for a new insulin management system results in concerns regarding the manufacture of several components.
I.V. containers have not experienced significant change since the introduction of plastic to replace glass in the 70s. This I.V. bag offers a variety of features that address many concerns healthcare providers have with today’s more traditional options. Hospira Inc.
Silicone has emerged as one of the most researched biomaterials available to pharmaceutical makers and medical device manufacturers. As such, it readily lends itself to being an ideal choice for use in combination products where these two industries merge.
Combination products can cause twice as many problems for companies in the testing of these devices since they require expertise in two highly regulated specialtiesmedical devices and pharmaceuticals. This article offers a number of areas manufacturers of these devices will have to consider.
These 0.079 in. and 0.1 in. board-to-board connectors are 100% RoHS-compliant. Male and female headers are offered in single, double, and quad row configurations, and in both plated through-hole (PTH) and surface mount (SMT) versions.
The LNB Series is a product family of high density, ultra low noise, fully isolated DC/DC converters. The series offers output ripple of 10 mVp-p and operate over input voltage ranges of 4.
The Flextrak Plasma Processing System improves the reliability and quality of medical devices through surface modification and ultra-cleaning. The plasma processes improve the bond uniformity and adhesion between dissimilar materials, enhancing the performance of end products, such as stents.