Advertisement
Product Releases
Subscribe to MDT Magazine Product Releases
View Sample

FREE Email Newsletter

MDT Daily

Pre-Assembled Tubing Sets

December 6, 2004 7:23 am | Comments

Tubing sets made with PTFE tubing in 1/16 in. and 1/8 in. O.D. sizes are cut in the appropriate desired lengths and assembled with the distinctive, permanently attached, color-coded Ferrulok fitting system on one or both ends.

PTFE Coated Hypotubes

December 6, 2004 7:23 am | Comments

This PTFE coating service precisely applies PTFE onto the O.D. of stainless steel or nitinol hypotubes with 0.0001 in. to 0.0004 in. tolerance.

Silicone Hose

December 6, 2004 7:23 am | AdvantaPure | Comments

Color braid silicone hose offers a unique advantage for line identification. Incorporated into

Advertisement

Tubing/Extension Sets

December 6, 2004 7:23 am | Comments

Extension set capabilities range from micro bore, small, standard to large bore sizes with co-extruded tubing available. Utilizing cutting edge technology, a broad range of materials and thermoplastic resins are available for device design including non-DEHP, PVC tubing.

Tubing Set Assembly

December 6, 2004 7:23 am | Kahle Automation | Comments

Using integration and programming skills, two cameras, and some robotics, the company is able to assemble 1,000 tubing set configurations with just one system. The only mechanical changeover required is the coil head size and the different size tubing spools.

TPR Tubing (1513)

December 6, 2004 7:23 am | Comments

Suprene tubing is produced under Good Manufacturing Practices (GMP) using first-quality polypropylene-based TPR. It offers excellent low-temperature flexibility, is lighter in weight than comparable sizes of rubber tubing, and provides good resistance to tearing and fatigue from repeated flexing.

Sealers (1509)

December 6, 2004 7:20 am | Accu-Seal Corp. | Comments

The 630CH and 630CH “mini” validatable constant heat sealers are ideal for high production environments. The 630CH features seal platen lengths of 8 in., 15 in., and 20 in.

Caster (1507)

December 6, 2004 7:20 am | Comments

This caster is ideal for the institutional/medical market as it offers easy maneuverability and low maintenance in an attractive package. Twin wheel design, swivel caster has a precision ball bearing in swivel head and plain bearing in wheel. The housing and wheel center are made of polyamide.

Advertisement

Wireless Footswitch

December 6, 2004 7:20 am | LINEMASTER Switch Corporation | Comments

This IR wireless footswitch eliminates the nuisance of wires under foot while invisible infrared light waves fill the room with 360 degrees of signal. Also, because it uses light rather than radio waves, it resists interference.

Safety Light Curtain

December 6, 2004 7:20 am | Comments

Features added to the EZ-SCREEN non-contact, point-of-operation machine guarding safety light

Paperless Manufacturing System

December 6, 2004 7:20 am | Comments

The InSite Rapid eDHR is an integrated paperless manufacturing system that helps manufacturers improve operations performance, shorten manufacturing cycle times, and reduce the cost of compliance.

High Temperature Caps

December 6, 2004 7:20 am | Caplugs | Comments

This series of caps has vented sides to ensure they won’t pop off during extreme heat processes. The VVC series also has a pull-tab for easy removal.

Power Supply (1497)

December 6, 2004 7:20 am | Comments

The MW136 external power series features a 100-250 VAC universal input and is available in both desktop and wall-mount styles. All models are single output ranging from 23 watts to 60 watts of power. There are eight models in the family ranging from 3.3 volts to 24 volts.

RFID Tagging

December 6, 2004 7:20 am | Comments

The RFID Integrated Model 400 System enables packagers to quickly and easily meet supplier demand for RFID tagged cases and cartons. The system reliably encodes, verifies, and applies RFID tags at speeds up to 30 cases/cartons per minute.

Puerto Rico: What’s Behind the Growth

December 6, 2004 6:45 am | Comments

Marie Robert, director of new business development at Pridco, offers key data points on the robust state of medical device manufacturing in Puerto Rico.

TOPICS:

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading