Advertisement
Product Releases
Advertisement

Spinning Flare Nuts Rotate Freely for Quick Attachment

Tue, 07/02/2013 - 5:22pm
MDT Staff

LISTED UNDER:

New PEM Type SFN spinning flare nuts are designed to rotate freely when permanently captivated in thin metal sheets for quick attachment to mating hardware and reduced need for loose fasteners such as flange nuts. When paired with a self-clinching stud or other fixed externally threaded hardware, all loose hardware can be eliminated from an application to help streamline assembly time and decrease production costs.

PEM Type SFN one-piece flanged steel hex nuts install easily in steel, stainless steel, or aluminum sheets of any hardness and as thin as 1mm. Upon installation, the nut becomes permanently captive and will spin freely in the sheet to accommodate mating hardware for final component attachment. The fastener installs by inserting it into a properly sized, pre-punched, and embossed mounting hole and then applying sufficient squeezing force to flare the shank. When installed, the part will appear identical to a standard flanged hex nut above the sheet and will remain flush on the other side.

For more information, visit www.pemnet.com.

Advertisement

Share this Story

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading