Advertisement
Product Releases
Subscribe to MDT Magazine Product Releases

Air Locks

June 8, 2004 9:52 am | Clean Air Products Corp. | Comments

Designed to transfer parts and equipment into and out of cleanrooms, the Series 18 Pass Thru Air Locks significantly reduce potential contamination by decreasing the number of people entering and exiting the cleanroom. The units are available in white polypropylene or optional stainless steel.

Rotary Stage

June 8, 2004 9:52 am | Comments

The ASR1100 series is an extension of the ASR1000 direct-drive rotary stage used in many laser machining applications, including the manufacture of the most technologically-advanced cylindrical devices in use today.

Contract Manufacturing

June 8, 2004 9:52 am | Enova Medical Technologies | Comments

Company is an experienced provider of contract manufacturing services for the medical device industry, and the management team has developed and commercialized over 100 devices while at medical device corporations.

Advertisement

Power Supply (833)

June 8, 2004 9:52 am | GlobTek, Inc. | Comments

The GT(M)2065-80 series delivers up to 16.67 Amperes of continuous output power with 10CFM of airflow for 3.3vdc output applications, 11 Amperes for 5vdc applications. Series has output voltages ranging from 3.3V to 48V in 0.

Code Reading Software

June 8, 2004 9:52 am | Cognex Corp. | Comments

Based on the company's patented PatMax&reg technology, IDMax is designed for Direct Part Mark

Controller

June 8, 2004 9:52 am | Fluid Metering, Inc. | Comments

The V200 Stroke Rate Controller is designed for precision control of all FMI V-Series Variable Speed Metering Pumps. The V200 Controller allows pump speed settings to be adjusted either manually in 0.

Fluid Insert Connector

June 8, 2004 9:52 am | ODU-USA, Inc. | Comments

The ODU MEDI-SNAP Fluid Insert connector is a special version in the ODU MEDI-SNAP product line. It operates at a maximum working pressure of 2 bar. The plastic tubing can range from 5.3 to 6.5 mm diameter. As all MEDI-SNAP connectors, this version is IP 50 and offers 6 color codes.

Cabinets (825)

June 8, 2004 9:52 am | Schroff | Comments

A line of affordable assemble-to-order cabinets were introduced to meet the specific requirements of individual customer applications.

Advertisement

Thin Film Resistor

June 8, 2004 9:52 am | Comments

In response to demands from design engineers for increased resistance values in smaller packages, resistor manufacturer TT electronics IRC offers its Chromaxx&#153 Series, chromium silicon oxide resistors with resistance values up to 15M&#149 for medical and instrumentation applications.

TPR Tubing

June 8, 2004 9:52 am | Newage Industries, Inc. | Comments

Suprene&reg TPR tubing is produced under Good Manufacturing Practices using first-quality, polypropylene-based TPR (thermoplastic rubber).

Linear Motion Components

June 8, 2004 9:52 am | Bosch Rexroth Corporation | Comments

This 14-page, color brochure, "Precision in Motion," provides an overview of the company's linear motion solutions, including a description of components that are precision engineered to perform reliably and with little or no maintenance.

Disposable Device Manufacturing

June 8, 2004 9:52 am | Ibs-Integrated Biosciences Inc. | Comments

IBS offers complete contract manufacturing of class I and II disposable medical devices. From product design support and prototyping through assembly, packaging, and sterilization, it can handle the entire outsourcing program.

Tubing Cutter

June 8, 2004 9:52 am | Comments

The WC601 Series Automatic Wire and Tubing Cutters cut flexible tubing up to 1-1/8 in. OD into lengths from 0.1 in. up to 99,999.99 in. to very tight specifications such as those required for medical applications.

Brush DC Motors

June 8, 2004 9:52 am | Pennengineering Motion Technologies | Comments

Pittman&reg Series 14000&#153 brush-commutated DC motors and gearmotors feature 11-slot skewed armatures designed to enhance performance by minimizing magnetic cogging (or reluctance torque). This series of motor products offers quiet and smooth operation for a wide range of power applications.

TOPICS:

Telecentric Lens

June 8, 2004 9:52 am | Edmund Optics | Comments

The 0.08X MVO&reg Telecentric Lens, when coupled to a 2/3 in. format CCD, offers a 4 in. horizontal field of view, which is much larger than the previous field of view (71 mm at 0.125X) available from this line of lenses.

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading