Product Releases
Compact, Powerful, High Speed Spindles
March 27, 2013 10:20 am | by MDT Staff | Ibag North America | CommentsIBAG North America will feature the expanded “Micro Line” spindles at the MD&M EAST 2013 event in booth 2035. These compact and powerful high speed spindles for Swiss turning are offered as 20 and 22 mm to the 25 mm diameter models that operate up to 120,000 rpm.
TE-Cooled MPPC Module
March 27, 2013 10:03 am | by MDT Staff | Hamamatsu Corp. | CommentsHamamatsu Photonics introduce the new C11208 MPPC module which integrates the S11028 series MPPC, a pixelated silicon avalanche photodiode operated in Geiger-mode, with the addition of a high performance thermoelectric cooler.
Tubes as Thin as Fine Thread
March 26, 2013 11:04 am | by MDT Staff | Goodfellow Corporation | CommentsTubes with an outer diameter as small as 0.15 mm are available from Goodfellow in lengths ranging from a fraction of a meter to large production runs. The 0.15 mm OD tube is 99.95% gold and has an inner diameter of 0.05 mm.
Walk-Away Tube and Vial Labeling
March 26, 2013 10:59 am | by MDT Staff | Computype, Inc. | CommentsComputype, Inc., in partnership with Nautilus Systems, today announced the launch of the Flexible Tube and Vial Feeder (Flex TVF), an innovative new system for automatic downstream feeding of tubes and vials that helps increase efficiency.
Dispensing Valve Operates with Extreme Precision
March 26, 2013 10:12 am | by MDT Staff | Dymax Corporation | CommentsThe Model 455 dispensing valve from Dymax Corporation is a pneumatically operated, normally closed pinch valve with a disposable fluid path. It was designed to dispense a variety of low- to medium-viscosity materials with extreme precision.
Guided Electric Cylinder
March 26, 2013 10:07 am | by MDT Staff | Bimba Manufacturing Company | CommentsBimba Manufacturing, an industry-leading provider of pneumatic, hydraulic, and electric motion control solutions, announced today the release of the Original Line Electric Thruster (OLET), the newest addition to the electric motion control line.
Rotary Pump and Compressor
March 25, 2013 11:37 am | by MDT Staff | Thomas Division | CommentsThis quiet, pulsation-free pump is available in two configurations – the DTE (pressure) with inlet silencer, pressure relief valve and outlet tube connector, and the VTE (vacuum) with outlet silencer and tube connector.
Multitasking Machine for Increased Efficiency
March 25, 2013 11:30 am | by MDT Staff | Methods Machine Tools, Inc. | CommentsMethods Machine Tools, Inc., a leading supplier of innovative precision machine tools, automation and accessories, has introduced the Nakamura-Tome NTJ-100 Multitasking Turn/Mill Center which is well-suited for a wide range of production needs.
Non-Magnetic Chip Resistors for MRI Applications
March 25, 2013 10:59 am | by MDT Staff | International Manufacturing Services, Inc. | CommentsInternational Manufacturing Services, Inc. (IMS), a leading manufacturer of high quality thick film resistors, terminations, attenuators, couplers, thermal management devices, planar dividers and planar filters to the electronics industry, has introduced a new type or chip resistor terminal which are non-magnetic and ultra leach resistant.
Calibrated 3D Machine Vision Inspection
March 25, 2013 10:50 am | by MDT Staff | Cognex Corp. | CommentsCognex Corporation, the world's leading supplier of machine vision systems, has announced the release of the new DS1000 3D laser profiling system. The system calibrates real-world units of measurement for inspections too difficult to perform with traditional two-dimensional machine vision.
Component Miniaturization in a Broad Range of Materials Offers More Options
March 22, 2013 11:28 am | by MDT Staff | Minnesota Rubber & Plastics | CommentsMinnesota Rubber and Plastics provides custom miniaturized components in a broad range of materials, giving designers more options and greater flexibility.
Brushless DC Motor
March 22, 2013 11:20 am | by MDT Staff | Groschopp, Inc. | CommentsGroschopp Inc. introduces an updated Brushless DC (BLDC) motor and several gearmotor combinations. Due to the lack of wear components, the BLDC motor is considered to be a maintenance-free, high reliability motor with a life of 20,000 hours or more.
Low Power Solenoid Valve
March 22, 2013 10:41 am | by MDT Staff | Bimba Manufacturing Company | CommentsThe V2ʼs lightweight, high-strength polymer construction, combined with its expanded voltage options, ensures that every valve delivers long-lasting energy efficient solutions.
High Temperature, Inductive Proximity Sensors
March 22, 2013 10:35 am | by MDT Staff | CommentsAutomation Systems Interconnect, Inc. is pleased to announce their line of high temperature inductive proximity sensors are now available in sizes M8, M12, M18, M30 and M50.
Washdown Shaft Collars
March 21, 2013 10:33 am | by MDT Staff | Ruland Manufacturing Co. | CommentsRuland has developed a new shaft collar for high pressure washdown applications. Washdown shaft collars are a patent pending design containing a 303 stainless steel shaft collar, male and female shrouds made from FDA compliant materials, and three O-rings with FDA compliant lubrication.
