Advertisement
Product Releases
Subscribe to MDT Magazine Product Releases
View Sample

FREE Email Newsletter

MDT Daily

Dual Lane Revolution Horizontal Flow Wrapper

February 19, 2014 5:17 pm | by MDT Staff | Campbell Wrapper Corp. | Comments

Campbell’s Dual Lane Revolution Flow Wrapper offers increased productivity for low-profile products such as crackers, candies, syringes, and many other food and non-food products. Two lanes of products are wrapped simultaneously to produce packages at speeds up to 1,200 packages per minute...

SMD OCXO Offers Compact Footprint, Reliable Operating Performance

February 19, 2014 5:12 pm | by MDT Staff | Comments

Fox Electronics now offers the low power FTP Series, a surface mount OCXO featuring a compact footprint of only 14.3 mm x 9.3 mm x 6.7 mm (L x W x H) and power consumption of only 0.6 W maximum. The new SMD HCMOS OCXO incorporates a Stratum 3 clock for enhanced timing performance...

12 mm Rugged Connectors for Harsh Environments

February 19, 2014 4:42 pm | by MDT Staff | Fischer Connectors, Inc. | Comments

Fischer Connectors has extended its product range for the popular Fischer UltiMate Series with the introduction of the size 07. This brand new connector is smaller, more compact and lighter than the current range in the Fischer UltiMate Series, but has the same performances...

Advertisement

8-Pin Connectors with X-Coding

February 19, 2014 4:35 pm | by MDT Staff | Comments

Binder-USA has announced the addition of 8-pin X-coded connectors to the M12 product family. With the X-coding features it is now possible to transmit up to 10 Gbit/s for industrial applications. The high bandwidth is guaranteed by isolating the four pairs from one another with an X-shaped shield.

Expanded Line of Rechargeable Lithium Polymer Batteries

February 19, 2014 11:57 am | by MDT Staff | Comments

Providing design engineers with new options for compact and higher power capacity rechargeable power sources for portable medical, industrial and consumer electronic devices, the Renata Batteries division of the Swatch Group recently added three new types to its family of lithium polymer batteries...

Vertical Incline Conveyor Offered by Dynamic Conveyor

February 19, 2014 11:48 am | by MDT Staff | Comments

With the increasing demand for more sustainable material handling solutions, Dynamic Conveyor is introducing a vertical incline conveyor for parts conveying. The DynaCon conveyor saves floor space when there is a need to get parts to a higher elevation...

Pneumatic Crimping Machines

February 14, 2014 3:48 pm | by MDT Staff | Comments

For years, the Schleuniger CT line of pneumatic crimping machines has proven to be an ideal solution for a large range of loose-piece crimping applications. Based on the great reputation of these machines, we are excited to launch the next generation replacement machines with the introduction of the new CT series...

Ball Valves Require Less Power, Provide Smaller Footprint

February 14, 2014 3:42 pm | by MDT Staff | Comments

Clark Solutions has introduced the 8P Series of Direct Mount Pneumatic Actuated Ball Valves. Available in 18 brass or stainless steel models with 2-way or 3-way configurations and 1/4" to 4" pipe sizes, 8P Pneumatic Actuated Ball Valves can be customized by original equipment manufacturers to meet the requirements of virtually any application.

Advertisement

Silicone Cable Assembly Solutions

February 14, 2014 3:38 pm | by MDT Staff | Molex | Comments

Molex Incorporated has introduced MediSpec silicone cable solutions from Affinity Medical. Reusable and ergonomic MediSpec silicone overmolded cable and interconnect assemblies deliver high reliability and performance in medical applications, including endoscopy, ophthalmic lasers, surgical power tools and other operating room instruments...

Commercial-off-the-Shelf Crimp Pins

February 14, 2014 3:27 pm | by MDT Staff | Mill-Max Mfg. Corp. | Comments

Mill-Max Mfg. has announced the addition of new crimp pins to our selection of wire termination products. These new pins are commercial-off-the-shelf (COTS) equivalents to the popular Mil-Spec M39029 crimp pins. If your application does not require Mil-Spec components but demands the same reliability and form factor, then these pins will fit the bill perfectly...

Incredibly Small Liquid Flow Sensors

February 14, 2014 3:14 pm | by MDT Staff | Comments

Swiss sensor manufacturer Sensirion AG has announced the launch of the new liquid flow series LPP10 and LPG10 in an unsurpassed small size. The new technology is based on planar microfluidic substrates and the sensors are available with a glass (LPG10) or a plastic (LPP10) packaging...

Interior Permanent Magnet Brushless Motors

February 14, 2014 3:06 pm | by MDT Staff | Comments

Applimotion’s ULT, UTH, UTS, and UTO frameless motor kits cover a wide range of applications in direct drive motion control with their large through-hole surface permanent magnet (SPM) rotor configurations. Applimotion is now offering interior permanent magnet (IPM) versions of these motor kits extending capabilities to new applications...

Circuit Breaker for PCB Mounting

February 14, 2014 2:58 pm | by MDT Staff | Schurter, Inc. | Comments

Schurter’s T9 fuseholder style thermal circuit breaker series is now expanded to include Model T9-818 for PCB mounting. The new model complements the existing T9 series assortment for panel mounting, providing a complete range of mounting styles equivalent to closed fuseholders...

New Slip-Ease Clutches Offer Improved Backlash

February 14, 2014 2:48 pm | by MDT Staff | Comments

Sterling Instrument offers a new, low backlash variant on its existing line of multi-plate in-line slip clutches. Both versions feature an all mechanical design, which makes them considerably cheaper than electro-mechanical alternatives. The slip plates are layered with friction pads in between...

Pins Offer Alternative to Screws in Compact Electronics

February 13, 2014 5:04 pm | by MDT Staff | Comments

New microPEM TackSert pins introduce reliable fastener solutions to attach top panels securely to a base panel or chassis in compact electronic assemblies. These pins provide practical alternatives to micro screws by eliminating the typically costly issues associated with threaded hardware...

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading