Product Releases
Subscribe to MDT Magazine Product Releases
View Sample

FREE Email Newsletter

MDT Daily

Voltage-Controlled Oscillator

September 10, 2007 6:53 am | Comments

The CVCO55CW-1000-2000 VCO operates from 1 to 2 GHz with a control voltage range of 1~20V. This VCO features a typical phase noise of -100 dBc/Hz at 10 KHz offset and has excellent linearity. The model is packaged in the industry standard 0.5 x 0.5 in. SMD package.

Fuse Holders

September 10, 2007 6:53 am | Keystone Electronics Corp. | Comments

This high reliability and compact PC auto blade fuse holder is uniquely designed to accept standard and low profile ”mini-size fuses” and hold them in place after multiple insertions.

Temperature Testing

September 10, 2007 6:53 am | Comments

The TP4500 ThermoStream System combines high thermal capacity and portability with a -45&#176C to 225&#176C temperature range for testing and characterizing small to large devices. The robust TP4500 is designed for continuous use in a 24/7 production environment as well as a lab setting.


Linear Air-Bearing Stage

September 10, 2007 6:53 am | Comments

Leading edge manufacturing demands positioning tolerances beyond the capability of conventional ball-screw and mechanical-bearing positioning systems.

Non-Contact Magentostrictive Sensor

September 10, 2007 6:53 am | Comments

This C-Series sensor is ideal for linear-position and liquid-level measurement in medical applications such as fluid collection and disposal, contrast injection fluid delivery, hospital bed motion, dental chair positioning, and patient mobility and accessibility equipment.

Fiber Optic Illuminator

September 10, 2007 6:53 am | Comments

The Fiber-Lite DC950H machine vision fiber optic illuminator is designed for machine vision integrators. It is a 150-watt quartz halogen regulated illuminator that has been improved to produce a higher output with greater reliability and is now RoHS compliant.

Wire and Ribbon

September 10, 2007 6:53 am | Comments

Precious metal clad wire and ribbon are metallurgically bonded to a core material, feature a smooth, consistent surface finish, are functionally equivalent to solid products, and cost considerably less.

Photomultiplier Tubes

September 10, 2007 6:53 am | Comments

The R9800, R9420, and R9779 photomultiplier tubes (PMTs) each feature an extremely short transit time spread that is uniform across the entire effective area of the photocathode. The photocathode is bialkali material with a spectral response range of 300 to 650 nm.


Micro Solenoid Valves

September 10, 2007 6:53 am | Humphrey Products Company | Comments

The 401 Series direct acting micro solenoid valves are compact and offer a field-proven poppet design for reliability. The valves are 10 mm wide; have a five port, 4-way configuration; and are available as single solenoid.

Protective Connector Caps

September 10, 2007 6:53 am | Comments

M8 protective caps, when applied to unmated connectors, ensure a protection rating of IP67. The caps feature a PA (polyamide) body, PUR (polyurethane) retaining strap, and a nitrile rubber (NBR) seal&#151a common material used for o-rings.

Self-Clinching Fasteners (4339)

September 10, 2007 6:53 am | PennEngineering | Comments

PEM SpotFast stainless steel self-clinching fasteners ideally suit flush-mount attachment applications where corrosion resistance may be required.

Hand-Held Scale

September 10, 2007 6:53 am | Comments

The OHAUS HH320 hand-held scale operates on two AAA alkaline batteries, has a sealed keypad with buttons for on/off, weighing units, zero, and backlighting the large LCD display. Featuring a 320 gm capacity with 0.1 gm readability and &#1770.

Diode Laser

September 10, 2007 6:53 am | Comments

The 2495-L3 Series 808 nanometer fiber-coupled diode laser incorporates new chip technology to provide a reliable and less expensive laser solution for many industrial, dental, and medical applications.

Pumphead (4329)

September 10, 2007 6:53 am | Comments

The easy-to-load 313D pumphead is offered for blood processing applications. It accepts seven different tube sizes for a flow range of 0.25 to 3,000 ml/min, and pressures up to 30 psi. The easy tube loading feature enables the 313D to provide foolproof loading and minimal downtime.

Fastener Clipper Splice

September 10, 2007 6:53 am | Comments

The distinguishing characteristic of the Unibar Fastener Clipper Splice is all the teeth, or hooks, are joined together by a single bar stretching the length of the conveyor. This is important because it prevents teeth that may become loose during operation from detaching from the conveyor belt.


You may login with either your assigned username or your e-mail address.
The password field is case sensitive.