Advertisement
Products

Component Fabrication

LISTED UNDER: Equipment/Tools Services

CableEye® HVX HiPot Cable Tester System: Base Unit Item 829

CAMI Research, Inc.
For diagnostic and Pass/Fail Testing — Permits expanded testing for insulation resistance and dielectric breakdown. After checking for opens, shorts, miswires, and resistance limits, the HVX hipot module will apply a user-selectable voltage from 10v to 1500v DC, or 10v to 1000v RMS AC, to each connection group in the cable. Ramp Up, Ramp Down, Dwell Time (same as Test Time), Trip Current, and Trip Delay (same as Soak Time) may be programmed for your specific requirements. Current leakage detected during the high voltage test phase provides a measure of insulation resistance up to 1 GΩ, and any leakage current exceeding a preset limit reveals the presence of moisture, flux, or other contamination on exposed contacts.

Light Director™ Guided Assembly System: A CableEye® Accessory

CAMI Research, Inc.
For assembling connectors used in aerospace, medical, and other high-reliability applications. Light fibers driven by super-bright LED lamps individually illuminate target cavities in the connector being assembled.
 • Light-Directed guided assembly • 1st-Sided Pinning and 2nd-Sided Pinning with electrical test • Increases productivity by up to 50% over manual assembly • Reduces technician fatigue • Reduces errors to near zero ◊ The Light Director™ system is an accessory for the CableEye® PC-Based cable test system. It requires a reusable mounting kit for each mating connector (see Items CB37A to CB38A), and the AutoBuild Guided Assembly Software (Item 728).

CableEye® M3U Cable Tester System: Item 821U

CAMI Research, Inc.
For diagnostic and Pass/Fail Testing — Find, display, log, document: opens, shorts, miswires, intermittent connections, continuity, contact and isolation resistance, embedded resistors and diodes. • 152 Test point base unit (for ≤76-conductor cable) • Expandable to 2560 test points (for >76-conductor cable) • Resistance measurement 0.3Ω-10MΩ • Graphical User Interface (GUI) • 9x12" bench footprint
 ◊ Includes: CB15 board set (Item 745), PC s/w, DB of >200 standard cables, 1yr warranty, 1yr free tech support, one-year free software and database upgrades. USB interface standard. ◊ If cables will never exceed 64 conductors, the M2-Basic system (Item 810) offers similar capabilities without resistance measurement at a lower cost.

Design/Manufacturing Services

Functional Integration in Ultrasonic Welding

Herrmann Ultrasonics, Inc.

In semi-automated multi-head machines, several processes are often jointly integrated to achieve high functional density in confined spaces. Parts assembly functions, component detection and sensing features, as well as various test processes are added to the actual...

IoT-Enabled Product Portfolio

Wind River, delivering software for intelligent connected systems, today announced that it has enhanced and expanded its Wind River Helix product portfolio to address the system-level opportunities and challenges of the Internet of Things (IoT). In addition, the company has created...

Multi-Stranded Flexible Shaft

ASAHI INTECC USA, INC.

The ACTONE CABLE TUBE Ultra-Thin (UT) is a hollow, single-layer, multi-stranded flexible shaft composed of flat stainless wire drawn by Asahi Intecc to reduce the wall thickness. Medical device and industrial device designers can achieve a customized solution with a reduced device profile, 1-1 torque in tortuous paths and anatomies...

Electronic Components

CableEye® HVX HiPot Cable Tester System: Base Unit Item 829

CAMI Research, Inc.
For diagnostic and Pass/Fail Testing — Permits expanded testing for insulation resistance and dielectric breakdown. After checking for opens, shorts, miswires, and resistance limits, the HVX hipot module will apply a user-selectable voltage from 10v to 1500v DC, or 10v to 1000v RMS AC, to each connection group in the cable. Ramp Up, Ramp Down, Dwell Time (same as Test Time), Trip Current, and Trip Delay (same as Soak Time) may be programmed for your specific requirements. Current leakage detected during the high voltage test phase provides a measure of insulation resistance up to 1 GΩ, and any leakage current exceeding a preset limit reveals the presence of moisture, flux, or other contamination on exposed contacts.

Light Director™ Guided Assembly System: A CableEye® Accessory

CAMI Research, Inc.
For assembling connectors used in aerospace, medical, and other high-reliability applications. Light fibers driven by super-bright LED lamps individually illuminate target cavities in the connector being assembled.
 • Light-Directed guided assembly • 1st-Sided Pinning and 2nd-Sided Pinning with electrical test • Increases productivity by up to 50% over manual assembly • Reduces technician fatigue • Reduces errors to near zero ◊ The Light Director™ system is an accessory for the CableEye® PC-Based cable test system. It requires a reusable mounting kit for each mating connector (see Items CB37A to CB38A), and the AutoBuild Guided Assembly Software (Item 728).

CableEye® M3U Cable Tester System: Item 821U

CAMI Research, Inc.
For diagnostic and Pass/Fail Testing — Find, display, log, document: opens, shorts, miswires, intermittent connections, continuity, contact and isolation resistance, embedded resistors and diodes. • 152 Test point base unit (for ≤76-conductor cable) • Expandable to 2560 test points (for >76-conductor cable) • Resistance measurement 0.3Ω-10MΩ • Graphical User Interface (GUI) • 9x12" bench footprint
 ◊ Includes: CB15 board set (Item 745), PC s/w, DB of >200 standard cables, 1yr warranty, 1yr free tech support, one-year free software and database upgrades. USB interface standard. ◊ If cables will never exceed 64 conductors, the M2-Basic system (Item 810) offers similar capabilities without resistance measurement at a lower cost.

Facility Equipment/Software

CableEye® HVX HiPot Cable Tester System: Base Unit Item 829

CAMI Research, Inc.
For diagnostic and Pass/Fail Testing — Permits expanded testing for insulation resistance and dielectric breakdown. After checking for opens, shorts, miswires, and resistance limits, the HVX hipot module will apply a user-selectable voltage from 10v to 1500v DC, or 10v to 1000v RMS AC, to each connection group in the cable. Ramp Up, Ramp Down, Dwell Time (same as Test Time), Trip Current, and Trip Delay (same as Soak Time) may be programmed for your specific requirements. Current leakage detected during the high voltage test phase provides a measure of insulation resistance up to 1 GΩ, and any leakage current exceeding a preset limit reveals the presence of moisture, flux, or other contamination on exposed contacts.

Light Director™ Guided Assembly System: A CableEye® Accessory

CAMI Research, Inc.
For assembling connectors used in aerospace, medical, and other high-reliability applications. Light fibers driven by super-bright LED lamps individually illuminate target cavities in the connector being assembled.
 • Light-Directed guided assembly • 1st-Sided Pinning and 2nd-Sided Pinning with electrical test • Increases productivity by up to 50% over manual assembly • Reduces technician fatigue • Reduces errors to near zero ◊ The Light Director™ system is an accessory for the CableEye® PC-Based cable test system. It requires a reusable mounting kit for each mating connector (see Items CB37A to CB38A), and the AutoBuild Guided Assembly Software (Item 728).

CableEye® M3U Cable Tester System: Item 821U

CAMI Research, Inc.
For diagnostic and Pass/Fail Testing — Find, display, log, document: opens, shorts, miswires, intermittent connections, continuity, contact and isolation resistance, embedded resistors and diodes. • 152 Test point base unit (for ≤76-conductor cable) • Expandable to 2560 test points (for >76-conductor cable) • Resistance measurement 0.3Ω-10MΩ • Graphical User Interface (GUI) • 9x12" bench footprint
 ◊ Includes: CB15 board set (Item 745), PC s/w, DB of >200 standard cables, 1yr warranty, 1yr free tech support, one-year free software and database upgrades. USB interface standard. ◊ If cables will never exceed 64 conductors, the M2-Basic system (Item 810) offers similar capabilities without resistance measurement at a lower cost.

Fluid/Air Transfer

Plastic and Metal Circular Connector

ODU-USA, Inc.

The German-engineered ODU MEDI-SNAP is a plastic and metal circular connector with miniature push-pull locking connector solutions for re-usable and disposable medical applications. ODU-USA a designer and manufacturer of high performance circular connector solutions and cable...

Sanitary Flanges with Barbs

Qosina

Qosina is pleased to announce the addition of seven new sanitary flanges with barbs, in stock and ready for immediate delivery. Available in two sizes, 0.5 inch/0.75 mini (#51617 - #51619) and 1 inch/1.5 inch standard (#51620 - #51623). Sanitary flanges have an oversized hose barb design that facilitates a strong adhesion to a biopharmaceutical tubing line...

Miniature Solenoid Valve

Parker Hannifin Corp.

New from Parker Hannifin, the Series MX – Model 7 is a miniature solenoid valve that provides portable medical device manufacturers a high performing, energy efficient pneumatic on/off control valve in a compact 10 mm size. “With the growing pressure to improve patient recovery rates and to reduce health...

Hardware

LISTED UNDER: Fasteners & Hardware

Clamp Style Shaft Collars

Ruland Manufacturing Co.

Ruland clamp style shaft collars are manufactured from select materials with fine finishes, high holding power, and a precise face to bore relationship making them ideal for the demands of medical equipment. They are commonly used for guiding, spacing, stopping, and component alignment. Medical equipment manufacturers benefit from the tightly controlled face to bore perpendicularity of Ruland...

Lead Screws

Haydon Kerk Motion Solutions

Haydon Kerk Motion Solutions proudly announces the addition of Kerk Micro Series lead screws to the Haydon Kerk Express web store with three different leads available for 24-hour shipment. Standard and “prototype” style nuts also are available. Haydon Kerk, an innovator in linear motion solutions, has applied its extensive knowledge...

PHT Position Hinge

Reell Precision Manufacturing Corp.

The new “PHT Position Hinge” from Reell Precision Manufacturing introduces an ideal solution for high-performance position control applications by providing reliable holding force in one direction while enabling easy adjustment with virtually no resistance in the other. This unique hinge delivering “one-way” motion especially suits vertical adjustment applications by holding solidly against...

Materials

Polyimide-Filled Polytetrafluoroethylene Compound

Bal Seal Engineering, Inc.

Bal Seal Engineering, Inc. has expanded its line of seal materials to include SP191, a polyimide-filled polytetrafluoroethylene compound. The company says the properties of the new material make it ideal for use in gas compressors, oxygen intensifier systems, and other medical equipment requiring low friction sealing in humid...

Silicone Products

Shin-Etsu Chemical Co. Ltd. is the largest chemical company in Japan, and is in its 62nd year of manufacturing silicone materials worldwide−producing over 4,000 different silicone products. Its subsidiary, Shin-Etsu Silicones of America, Inc. (SESA), recently introduced its new Low Dn LIMS™ product line at the MD&M West 2015 in Anaheim, CA on February 10, 2015. The KEG2003H Low Dn LIMS produ...

Rigid PVC Compound

Teknor Apex Company

A breakthrough in PVC technology now makes it possible for rigid PVC to replace polycarbonate (PC) in clear medical components such as connectors and check valves, obtaining comparable strength and excellentclarity while reducing or eliminating the stress cracking that often occurs in PC at the interface with flexible PVC components...

Packaging/Sterilization

NO2 Based Sterilizers

Noxilizer, Inc.

Noxilizer, Inc., provider of room temperature, nitrogen dioxide (NO2) based sterilization solutions, is pleased to announce that it has been approved for the CE marking of its RTS Series Sterilizers under the Medical Device Directive (MDD). The CE Mark opens the door for sales of Noxilizer...

Custom Decals

Nameplates For Industry, Inc. (NFi)

Custom decals that can be produced in a wide range of complex shapes and sizes with only a 10 piece minimum, for interior and outdoor use, are being manufactured by Nameplates For Industry, Inc. of New Bedford, Massachusetts. NFi Custom Decals feature full-color imaging with bright colors including metallic inks and can be printed on a variety of materials with reflective phosphorescent, met...

Plastic Enclosures

Polycase

Polycase, a US manufacturer of plastic electronic enclosures, has extended their NEMA 4X ML Series by adding a new size, the ML-44F. The new 4.50” x 4.50” x 2.44” polycarbonate enclosure is designed for rugged outdoor applications and is UL Listed to 508A, Type 1, 2, 4, 4X, 12 & 13 specifications...

Testing

LISTED UNDER: Equipment Services

CableEye® HVX HiPot Cable Tester System: Base Unit Item 829

CAMI Research, Inc.
For diagnostic and Pass/Fail Testing — Permits expanded testing for insulation resistance and dielectric breakdown. After checking for opens, shorts, miswires, and resistance limits, the HVX hipot module will apply a user-selectable voltage from 10v to 1500v DC, or 10v to 1000v RMS AC, to each connection group in the cable. Ramp Up, Ramp Down, Dwell Time (same as Test Time), Trip Current, and Trip Delay (same as Soak Time) may be programmed for your specific requirements. Current leakage detected during the high voltage test phase provides a measure of insulation resistance up to 1 GΩ, and any leakage current exceeding a preset limit reveals the presence of moisture, flux, or other contamination on exposed contacts.

Light Director™ Guided Assembly System: A CableEye® Accessory

CAMI Research, Inc.
For assembling connectors used in aerospace, medical, and other high-reliability applications. Light fibers driven by super-bright LED lamps individually illuminate target cavities in the connector being assembled.
 • Light-Directed guided assembly • 1st-Sided Pinning and 2nd-Sided Pinning with electrical test • Increases productivity by up to 50% over manual assembly • Reduces technician fatigue • Reduces errors to near zero ◊ The Light Director™ system is an accessory for the CableEye® PC-Based cable test system. It requires a reusable mounting kit for each mating connector (see Items CB37A to CB38A), and the AutoBuild Guided Assembly Software (Item 728).

CableEye® M3U Cable Tester System: Item 821U

CAMI Research, Inc.
For diagnostic and Pass/Fail Testing — Find, display, log, document: opens, shorts, miswires, intermittent connections, continuity, contact and isolation resistance, embedded resistors and diodes. • 152 Test point base unit (for ≤76-conductor cable) • Expandable to 2560 test points (for >76-conductor cable) • Resistance measurement 0.3Ω-10MΩ • Graphical User Interface (GUI) • 9x12" bench footprint
 ◊ Includes: CB15 board set (Item 745), PC s/w, DB of >200 standard cables, 1yr warranty, 1yr free tech support, one-year free software and database upgrades. USB interface standard. ◊ If cables will never exceed 64 conductors, the M2-Basic system (Item 810) offers similar capabilities without resistance measurement at a lower cost.
X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading