This series of equipment health monitoring (EHM) system detectors were developed specifically to monitor industrial equipment. The EHM system is used to monitor operation condition variances in industrial machinery that can lead to breakdowns, increased maintenance costs, and production stoppages.
EP33 is a unique room temperature curing epoxy adhesive for high temperature bonding applications. This two component epoxy offers the convenience of a room temperature cure with high temperature performance combined with good physical strength and dielectric properties.
DesiShield is fabricated with advanced desiccating technology to meet the packaging challenges associated with moisture sensitive devices and diagnostic products.
The metal Bi-lobe nano-miniature connectors are available with patent pending sealed backshells and braided cable shielding to reduce crosstalk and EMI problems in today’s high density electronic modules.
This bipolar chopper driver chip, NP3775, and state logic chip (phase distribution chip), NP7380, are offered for use with the company’s tin-can rotary and linear stepper motors. The firm provides motors, electronics, and engineering support for a complete stepper motor drive system.
This line of IEC 60320 filtered inlets and outlets are intended for medical applications, in addition to a variety of others. They have ratings from 6 to 20 amps and either 120 or 250 VAC. Features include robust screw mount, nickel plated, shielded enclosure; 6.
The TaskMate robotic loading and assembly system combines a FANUC LR Mate mini robot with ESS-designed equipment to create a system that reduces repetitive motion in the loading and assembly of packaged medical devices and other products.
This high-output [800 mA; also available as standard output (425 mA)], low-mercury (>= 8 mg) UVC lamp is offered for disinfecting air and water.
This engineered elastic nonwoven technology enables designers to provide unique elastic functionality and deliver soft-stretch comfort. It is latex-free and contains no elastomeric polymers or chemical additives, resulting in a versatile fabric that can meet a variety of industry needs.
The Professional Laser Series is a line of CO 2 laser systems that provides an impressive combination of high power (up to 120 watts using dual lasers), three popular work table sizes, and an advanced, materials-based print driver that delivers consistently good cutting and engraving results.
Company has augmented its ability to drill precise holes in polymer material by adding automated vision recognition to its process.
The RigiBelt is made of reinforced plastic and stainless steel. The chain comes together much like a zipper to form a column. It moves quickly and quietly while telescoping in and out, and is stored in a compact magazine. The actuator can be used for any kind of positioning in medical equipment.
The vacuum rated LFV Series MIV is a two-way, normally closed, chemically inert solenoid valve that is ideal for fluidic circuits that will see both positive and negative pressures, such as pump inlet/outlet valves.
The STF Series of Active Tracking Filters are designed to safeguard medical equipment against damaging low-energy voltage transients and high-frequency noise. The filters continuously track the input AC power line at all locations on the sinewave and instantaneously counter noise.
This family of fully automatic crimping machines has grown with the introduction of the CrimpCenter 64 with four processing stations and the CrimpCenter 65 with up to five processing stations.
The B6TS application-ready touch sensing IC family of products measures floating capacitance through most touch panel materials.
The DuraTurn 2550 lathe offers high performance machining at an extremely competitive price. It was developed with an extremely rigid body to minimize the effects of vibration and increase accuracy, even over long-term operation.
The Quattro s650 robot is an extremely fast light payload packaging and handling robot. It utilizes a patented 4-link parallel drive and carbon fiber construction to provide packaging cycle times which are twice as fast as conventional packaging robots and up to 240 pick-and-place cycles per minute.
This system is designed for precise 3D dynamic characterization of microelectromechanical systems (MEMS) and micro-optoelectromechanical (MOEMS) microstructures.
This power entry module, series 5707, advances the range of applications in the area of detachable power. It offers an alternative to makeshift accessories often used to prevent particles or liquids from entering the appliance.
Designed to eliminate operator dependency and for the demands of precise tube-to-tube welds, the axial compression bonder enables even stronger tube bonds. This bonder features Micro-Automation, the latest advancement in precision bonding technology.
A membrane resin dryer is available in models designed especially for injection molders of micro and precision components for medical devices. The company’s NovaDrier system dries virtually any type of resin. Throughput capacities of 7 to 150 lbs.
The 3M 427 and 439 aluminum tapes are offered for a variety of microplate sealing applications in the healthcare industry. These tapes offer a combination of performance and value and are a great alternative to more expensive tapes.
Microflex is a line of extremely compact and durable peristaltic pumping systems designed for installation in small instrumentation, such as in OEM clinical, diagnostic, laboratory dispensing, sampling, and analyzing.