Advertisement
MD&M West
Subscribe to MD&M West
View Sample

FREE Email Newsletter

Secant Medical to Highlight Alternative Options for Minimally Invasive Device Design at MD&M West

January 22, 2013 8:00 am | by The Associated Press | News | Comments

PERKASIE, Pa.--(BUSINESS WIRE)--Jan 22, 2013--Secant Medical, Inc. will exhibit the unique benefits of biomedical textile engineering for medical device design at the MD&M West Exhibition and Conference in Anaheim, CA on February 12-14, 2013. Biomedical textiles address the growing need for...

Ultrasonic Punching/Sealing Machine

January 21, 2013 10:41 am | Herrmann Ultrasonics, Inc. | Product Releases | Comments

The HiQ MPW (Modular Punch Weld) machine, a new technical development from ultrasonic specialist Herrmann Ultrasonics, can punch and weld at the same time. A cheaper membrane material belt of 5 – 22 mm can therefore be used...

NEW AND NOTEWORTHY Reasons to be in Anaheim February 12-14, 2013!

January 18, 2013 12:08 pm | by Bio-Medicine.Org | News | Comments

SANTA MONICA, Calif. , Jan. 18, 2013 /- There's no substitute for face-to-face!  Join us February 12-14 in Anaheim, CA because you won't find opportunities like these anywhere online. NETWORKING: Catch Up With Peers at the Welcome Reception Tuesday, February 12 at 4:00 P.M. in Hall E NEW VIP Receptions—Rub Elbows With Other VIPs! Wednesday, February 13 a...

Advertisement

Antimicrobial Technology, High Performance Thermoplastics for Medical Devices

January 18, 2013 10:01 am | Product Releases | Comments

BASF will showcase its antimicrobial technology and high performance thermoplastics at the Medical Design and Manufacturing (MD&M) West Show and MedTech Conference, Feb. 11-14, 2013, at the Anaheim Convention Center, Anaheim, California.

Handling Solutions and Machining Services

January 17, 2013 10:02 am | Product Releases | Comments

Virtual Industries Inc., a leading supplier of manual vacuum handling solutions, announces that it will display several advanced systems for part handling in Booth #1360 at the upcoming Medical Design & Manufacturing (MD&M) West Exposition...

PVC Free Assemblies Products

January 17, 2013 9:56 am | Eldon James Corp. | Product Releases | Comments

Eldon James Corporation, a leading U.S. based manufacturer of plastic tubing and fittings, is excited to highlight their unique capabilities with PVC FREE tubing and fitting assemblies among other new innovations...

Mid- to Low-Volume, High-Mix Electronic Manufacturing Services

January 17, 2013 9:48 am | by MDT Staff | Product Releases | Comments

Computrol understands the specialized needs of medical device manufacturers from quality to traceability and record retention. Computrol’s world-class team has the experience, equipment and processes in place to make any medical device outsource project a success.

Kraton Performance Polymers to Showcase Cariflex™ Polyisoprene Products, the Ultimate Natural Rubber Alternative, and Kraton™ ERS Polymers as Proven Alternatives to PVC in Medical Applications, MD&M West, Anaheim Convention Center, Anaheim, CA Febru

January 17, 2013 9:30 am | by PR Newswire | Kraton Performance Polymers, Inc. | News | Comments

HOUSTON, Jan. 17, 2013 /PRNewswire/ -- Kraton Performance Polymers, Inc. (NYSE: "KRA") a leading global producer of styrenic block copolymers and other engineered polymers announces plans to showcase Cariflex polyisoprene products, the ideal alternative to natural rubber, and Kraton...

Advertisement

Plastic Solutions for Portability, Miniaturization and Sustainability of Healthcare Applications

January 16, 2013 11:03 am | Product Releases | Comments

Recognizing the increasing prevalence of device miniaturization, a need for greater portability and a desire to find more sustainable solutions, SABIC’s Innovative Plastics business will exhibit at MD&M West...

Precision Laser Processing

January 15, 2013 10:10 am | Product Releases | Comments

At Medical Design & Manufacturing (MD&M) West in booth 3055, TRUMPF will highlight laser cutting, welding and marking solutions, ideal for the intricate requirements of medical device manufacturing.

Influential Medical Device Industry Leaders Announced as Keynote Speakers for Major Conference & Expo

January 14, 2013 3:25 pm | by The Associated Press | News | Comments

MD&M West 2013, the industry's most comprehensive MedTech conference, features a completely revamped program addressing business-critical challenges for medical device design and manufacturing. In addition to more than 100 technical presentations by industry experts and FDA officials,...

Galvo Fiber Laser Welding System and Small Diameter Tube Cutting

January 14, 2013 10:26 am | Miyachi Unitek Corp. | Product Releases | Comments

Miyachi Unitek Corporation, a leading manufacturer of welding equipment and laser processing systems, announces a number of new product innovations to be highlighted at the Medical Design & Manufacturing (MD&M) West...

Surface Measuring System

January 14, 2013 10:20 am | Mahr Federal, Inc. | Product Releases | Comments

Mahr Federal will be featuring the MarSurf XR 1, an economical, mobile, PC‑based surface measuring system, at MD&M WEST, February 12-14, 2013, at the Anaheim Convention Center, Anaheim, CA, Booth #2885.

Advertisement

DATA LINK Cables with Samtec Connectors

January 14, 2013 10:15 am | Product Releases | Comments

Flex Interconnect Technologies (FIT), a leader in design, manufacture and assembly of flexible printed circuits, announces that it will be exhibiting in Booth #423 at the upcoming Medical Design & Manufacturing (MD&M) West Exposition...

Soldering, Desoldering, and Rework Series

January 11, 2013 10:01 am | Product Releases | Comments

OK International will demonstrate the new Metcal MX-5200 Soldering, Desoldering, and Rework Series in Booth # 413 at the upcoming Medical Design & Manufacturing (MD&M)/Electronics West Exposition...

Custom Laser Marking Capability

January 11, 2013 9:56 am | Product Releases | Comments

A-Laser, a division of FCT Assembly and a premier laser cutting service specializing in the ablation of ultra-thin metals and plastics, will highlight its new laser marking capability in Booth #579 at the upcoming...

Package-on-Package Assembly

January 11, 2013 9:52 am | Product Releases | Comments

ACD, a leading supplier to the electronics industry and a leader in Package-on-Package (PoP) assembly, will exhibit in Booth #331 at the upcoming Medical Design & Manufacturing (MD&M) West Exposition...

SMD Components, PCB Boards, and Solder Training Kits

January 10, 2013 10:20 am | Product Releases | Comments

Practical Components and its sister company Practical Tools will showcase its latest tools and technology in booth #1856 at the upcoming Medical Design & Manufacturing (MD&M) West Exposition...

Testing, Engineering, and Training Services

January 10, 2013 10:03 am | Product Releases | Comments

Datest, a leading provider of advanced, efficient and mission-critical in-circuit testing, test engineering, and X-ray inspection solutions, will highlight its testing, engineering, and training services in Booth #244...

Silicone Vulcanization Process

January 7, 2013 10:34 am | by MDT Staff | Product Releases | Comments

ENGEL North America will introduce their new UV vulcanization process for silicone molding at the upcoming Plastec West show, February 12th -14th, 2013 in Anaheim, CA. On display will be a 110 ton ENGEL emotion all-electric machine...

High-Speed Milling Machine Provides Excellent Surface Finish and Part Detail

January 2, 2013 10:45 am | GF Agie Charmilles | Product Releases | Comments

The new high-tech, high-speed MIKRON HSM 200U LP milling machine from GF AgieCharmilles will make its North American debut at the 2013 Medical Design and Manufacturing (MD&M) West Show in booth 4167.

Tight Tolerance Springs and Stamping Capabilities

December 20, 2012 10:25 am | by MDT Staff | Connecticut Spring & Stamping | Product Releases | Comments

Connecticut Spring & Stamping (CSS), a manufacturer of precision parts for the medical, aerospace, firearms and defense industries worldwide, announces that it will showcase its expertise in producing precision medical product components...

UBM Canon's Medical Device Design and Manufacturing Conference Announces Redesigned and Revamped Program for 2013

December 18, 2012 3:25 pm | by The Associated Press | News | Comments

The MD&M West 2013 conference program has been revamped and redesigned to include themed tracks - each reflecting the key stages of medical device development: -- Design & Prototype -- Validation, Testing & Trials -- Regulatory Submissions & Approval -- Post-Market...

High-Purity TPV Medical Elastomer Range

December 17, 2012 11:11 am | Product Releases | Comments

Teknor Apex Company has developed two high-hardness grades in its Medalist® MD-200 series of thermoplastic vulcanizate (TPV) elastomers, extending the already broad durometer range...

OEM Pumps Designed for the Surgical Ablation Market

December 12, 2012 10:03 am | Watson Marlow Pumps Group | Product Releases | Comments

Watson-Marlow Pumps Group is unveiling a new range of 400RXMD OEM pumps, specifically designed for the surgical ablation market, in booth #1713 at MD&M West, from February 12-14, 2013, at the Anaheim Convention Center, in Anaheim, CA.

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading