Medical Design Technology
Dispensing Robot
February 8, 2006 5:56 am | I & J Fisnar, Inc. | Product Releases | CommentsThe I&J7100 bench top Cartesian dispensing robot handles a dispensing area of 8 x 6 in. and is capable of storing up to 100 different programs. Step-by-step intuitive instructions simplify job creation tasks, allowing a program to be entered and running in minutes.
Coordinate Measuring Machine (2745)
February 8, 2006 5:56 am | Carl Zeiss | Product Releases | CommentsThe Contura G2 coordinate measuring machine features the next generation scanning platform that offers the same high accuracy with either articulating or active scanning technology. It is available in two configurations: RDS and AKTIV.
EMI Shielding Air Filters
January 11, 2006 10:42 am | Universal Air Filter Co. | Product Releases | CommentsNeed to meet EMI shielding and medical imaging equipment safety and reliability standards for
Hydrophobic Membranes
January 11, 2006 10:42 am | Millipore Corporation | Product Releases | CommentsSureVent hydrophobic and super-hydrophobic membranes are gamma stable and can be used for improved sanitization capabilities.
Air Filters (2625)
January 11, 2006 10:42 am | Product Releases | CommentsActivator series air filters have multi-stage media construction—layers of multi-denier polyester fibers capture particles throughout the filter's depth. This prevents wasteful "face-loading," increases dust holding capacity, and maximizes the service life of the filter.
Nanofiltration Elements
January 11, 2006 10:42 am | Koch Membrane Systems | Product Releases | CommentsSelRO nanofiltration elements provide excellent chemical and thermal stability. Most nanofiltration membranes previously available were limited to aqueous applications within a pH range of 2 to 11, insufficient for certain pharmaceutical applications with aggressive cleaning requirements.
Stainless Steel Screens
January 11, 2006 10:42 am | Product Releases | CommentsFine MicroEtch stainless steel screens are manufactured using photoetching technology. Photoetching enables designers to specify a straight hole or a tapered hole, which facilitates liquid filtration and back flow cleaning. Hole sizes range from 0.003 in. and up.
Piezo Motor
January 9, 2006 6:20 am | New Scale Technologies, Inc. | Product Releases | CommentsThe tiny SQL series Squiggle motor offers precise linear motion at low power for smaller portable OEM electronic products, including medical devices. At 2.4 x 2.4 mm, the motor is half the size of the company's earlier motors for OEMs.
Micromachining Workstation
January 9, 2006 6:20 am | Photon Machines | Product Releases | CommentsThe Promaster is a compact turn-key micromachining system powered by a patented “ultra-fast” preionized excimer laser with short pulse lengths and flat-beams at 248 nm and other wavelengths.
Cored Wire
January 9, 2006 6:20 am | Sandvik Bioline | Product Releases | CommentsCored wire, a metal-to-metal composite, can be used in pacemaker and defibrillator leads. The product is a composite of an outer cobalt/nickel/chromium/molybdenum alloy (MP35N) tube and a pure silver core.
Laser Sensor (2603)
January 6, 2006 11:06 am | Banner Engineering Corp. | Product Releases | CommentsThe World-Beam QS18LD laser diffuse and QS18LLP laser retroreflective sensors deliver high-performance sensing with visible Class 1 lasers, tightly collimated sensing beams, and extended sensing ranges.
Power Supplies (2605)
January 6, 2006 11:06 am | Advanced Power Solutions - Aps | Product Releases | CommentsThe APS400MX series of 400 watt switching power supplies offer single and dual outputs ranging from 2.0 to 58 VDC with a broad range of standard options to meet customer specific requirements. These power supplies come in a standard u-frame package that measures only 5.0 x 8.0 x 1.6 in.
Linear Stage (2601)
January 6, 2006 11:06 am | Skf Usa Inc. | Product Releases | Comments"PICO" miniature linear stages can be incorporated easily into in-vitro diagnostic (IVD) instruments as fully integrated “plug-and-play” units.
Miniature Liquid Pump
November 2, 2005 7:09 am | KNF Neuberger, Inc. | Product Releases | CommentsAt 1.6 inches long, the NF5 allows for locating it closer to the pumping function. Featuring a flow rate of 50 ml/min, it develops a suction height of 13 ft water with a discharge pressure of 15 psig.
Piston Pump
November 2, 2005 7:09 am | Micropump, Inc. | Product Releases | CommentsThe Series PF valveless piston pump is specifically designed to ensure accuracy and reproducibility. The valveless design virtually eliminates clogging and allows for highly consistent metering and dosing of even soft-solid containing fluids.
Solenoid Valve (2477)
November 2, 2005 7:09 am | Humphrey Products Company | Product Releases | CommentsThe HKL5 valve is designed to offer zero leakage in liquid and gas applications. This direct acting solenoid valve is 12.6 mm wide, with a high 0.05 C v flow rate, low 1.8 watt power consumption, a pressure rating from vacuum to 30 psig, and a working temperature range from 32°F to 175°F.
Digital DC Converter
November 2, 2005 6:38 am | Emerson Network Power-Embedded Power | Product Releases | CommentsThe DTX digital DC converter will enable designers to prepare and evaluate products for use with the new digital architecture and open-source PMBus communication protocol as well as the industry-standard I2C bus.
MDT Exclusive: Mobile Technology Cart
November 2, 2005 6:38 am | Anthro Corporation | Product Releases | CommentsConvoi is a small sturdy cart with excellent mobility on 5 in. directional locking casters. With various widths and heights and adjustable shelf height within the unit, it provides flexibility in creating a cart for smaller spaces. This customizable cart offers a variety of shelf types.
Metrology System (2425)
November 2, 2005 6:38 am | Product Releases | CommentsWeighing in at just under 62 lbs and able to measure parts 14 in. in diameter and 18.5 in. high, the MMQ 100 is versatile and easy to set up and operate on the shop floor. Mechanical bearings eliminate the need for compressed air.
MDT Exclusive: Leak Detector
November 2, 2005 6:38 am | Sensistor Technologies, Inc. | Product Releases | CommentsThe H2000 Plus is a compact and robust instrument that pinpoints extremely small leaks using hydrogen as a trace gas. The auto ranging feature of the unit automatically adjusts the sensitivity to the situation, allowing operators to scan large areas and pinpoint leaks without ever touching a button.
Microcontroller
November 2, 2005 6:38 am | Microchip Technology Inc. | Product Releases | CommentsA family of 16-bit PIC microcontrollers has been offered to address the growing performance needs of embedded designers. The PIC24 family debuts with 22 general-purpose devices and offers up to 40 MIPS performance, 16 Kbytes of RAM, 256 Kbytes of Flash program memory, and up to 100-pin packages.
Microstepping Driver
November 2, 2005 6:38 am | Product Releases | CommentsThe upgraded IM481H Plus microstepping driver includes the patented motion control chip that adds active anti-resonance, ultra smooth low speed motion, and precise current control to perform demanding motion control applications. It drives stepping motors up to NEMA size 23. The driver measures 1.
Miniature Solenoid Valves
September 30, 2005 11:43 am | The Lee Company | Product Releases | CommentsSeries 120 solenoid valves are ultra-miniature, magnetically latched solenoid valves featuring high-performance flow-switching characteristics.
Backlit Conveyor
September 30, 2005 11:43 am | Product Releases | CommentsThe AccuVision internal backlit conveyor is engineered to enable efficient, accurate visual inspections.
Ultrasonic Press System
September 30, 2005 11:43 am | Dukane Corporation | Product Releases | CommentsThis ultrasonic precision press system features a 30/40 actuator mounted on an ultra-rigid support package. The 30/40’s square-welded, steel H-frame style column sets it apart from other systems. The column eliminates deflection so that the machine is repeatable and precise.
