This static dissipative vacuum hose is FDA-acceptable for use in clean rooms and features a friction-fitting molded cuff and grounding wire.
VISION 1 wipes consist of premium quality virgin polyester fibers that are knitted on state-of-the art equipment especially for use in cleanrooms. This fabric undergoes a multitude of processes including cleaning, scouring, cutting, and a special proprietary cleaning process.
The AS-T series rotary screw compressors are available in 20 and 25 hp models. The AS-T series feature integral refrigerated dryers and condensate drains to improve product quality and help reduce wear on production equipment.
The DURALAN II display filters were developed for flat panel displays that are used in high ambient light environments. They offer features that enable them to be used in environments when ambient light can create a glare.
A full line of miniature sintered filters, breathers, and mufflers are available to meet applications where no leaks and space saving are required. The filters are housed within 10-32 external to 10-32 threaded barb fittings.
HEPA and ULPA filters are offered for environments with the most stringent air purity requirements, including health care, pharmaceutical, and laboratory. Microguard 99 filters are available in 99.97%, 99.99%, and 99.999% efficiencies on 0.3 microns.
The Series 91HF Cleanroom Storage Cabinet uses an aluminum framed, motorized HEPA filter for nearly 100-percent interior cabinet ceiling coverage.
Gore Medical Membrane’s all-in-one design combines high particle-holding capability and long life with a contamination layer to provide a high level of protection to health care professionals, patients, and equipment.
Powerful “next generation” flame resistant coatings are utilized for filter media used to construct these dual EMI/RFI honeycomb air filters for medical electronics. Additionally, anti-microbial additives with a fungus growth rating of zero are being used.
TECH SPEC Shortpass filters are available in NIR wavelengths from 750 nm to 1100 nm. These filters
The Fluke 983 Particle Counter is a compact, lightweight test tool featuring an expanded data logging and six-channel particle size display (0.3 up to 10.0 µm), which allows users to run more tests faster and spend less time cycling through screens to get the data they need.
Booth 3032 Series 6000 linear pumps offer long life, low sound level, high and clean air flow, and excellent efficiency.
Booth 3139 The Model STRH pump is for precision fluid control in analytical and process instrumentation. It integrates the company’s patented CeramPump valveless piston pumping principal with precision stepper control.
Booth 2543 All three series of the latest MAE brand hybrid stepper motors can deliver accurate open loop control for high-performance positioning applications. MAE “Y Series” motors incorporate AlNiCo magnets and are well suited for high-speed operation.
Booth 2016 The guided pneumatic cylinder (GPC) is equipped with two rigid guide rods supported by either slide bearings or ball bearings, which offer a high level of stability.
Company provides stock USP Class VI tubing in over 100 sizes, including Microbore Tygon PVC, PVC, silicone, and high pressure braided. The Microbore (80A Durometer) ranges in size from an ID of approximately 0.01 in. to 0.05 in. and is sold in coils 500 feet in length.
This PTFE coating service precisely applies PTFE onto the O.D. of stainless steel or nitinol hypotubes with 0.0001 in. to 0.0004 in. tolerance.
Extension set capabilities range from micro bore, small, standard to large bore sizes with co-extruded tubing available. Utilizing cutting edge technology, a broad range of materials and thermoplastic resins are available for device design including non-DEHP, PVC tubing.
Suprene tubing is produced under Good Manufacturing Practices (GMP) using first-quality polypropylene-based TPR. It offers excellent low-temperature flexibility, is lighter in weight than comparable sizes of rubber tubing, and provides good resistance to tearing and fatigue from repeated flexing.
Tubing sets made with PTFE tubing in 1/16 in. and 1/8 in. O.D. sizes are cut in the appropriate desired lengths and assembled with the distinctive, permanently attached, color-coded Ferrulok fitting system on one or both ends.
PumpSil is a platinum-cured silicone tubing with a unique LaserTraceability feature. Designed with an ultra-smooth bore to control protein binding, PumpSil provides optimal pump performance.
Color braid silicone hose offers a unique advantage for line identification. Incorporated into
Using integration and programming skills, two cameras, and some robotics, the company is able to assemble 1,000 tubing set configurations with just one system. The only mechanical changeover required is the coil head size and the different size tubing spools.
This compact solenoid valve incorporates several features that make it an ideal choice in applications using corrosive fluids or where high-purity fluids are found. The materials in contact with the flow path are limited to PEEK and EPDM or FKM-GF.