This line of circular plastic connectors (CPC), named CPC – Medical, is designed for use in surgical instruments, RF and ultrasound ablation, and electronic patient monitors used in the operating room.
Blue XLamp XR-E LEDs are 70% brighter than the company’s previous blue power LEDs. These produce maximum luminous flux of 42 lumens at 350 mA. The blue XR-E is the newest release in the XLamp XR-E family, which includes excellent performance in warm- and cool-white LEDs.
HyperBGA is a PTFE-based coreless semiconductor package that enables silicon devices to run at extremely high speeds. The combination of the low loss, low dielectric constant material, and strip line cross sections enables signal speeds surpassing 12 Gb/s.
The high performance and low cost Limited Use Connector (L.U.C.) is ideally suited for the demanding environment of today’s high tech operating rooms. The disposable L.U.C. provides excellent quality allowing the medical design engineer to create a solution that ensures reliability and ease of use.
The Prisma II series of RGB/DVI/video converter boards provides a range of cost-effective solutions with analog control for connecting TFT LCDs to standard graphics and/or video interfaces.
These single-input, single-output isolated 1.5 W BPS series configurable DC/DC converters are now available with input voltage from 3 to 15 VDC and output voltage from 50 to 300 VDC.
This internally ruggedized medical cable provides excellent durability while remaining lightweight and flexible.
Ideal for medical applications, the multi axial rotational connector (MARC) is designed to mate while traveling through an arc with a 3-inch minimum radius. The MARC is rated to 30 Amps while combining power, signal, and ground circuitry into one package.
MicroLens edge-lighting modules provide white LED backlighting for LCDs that serves a multitude of functions with a minimum of LEDs for a wide range of display applications.
This SiliconDrive platform is designed to overcome storage system reliability and compatibility
Most medical equipment used in North America requires a hospital grade power cord which typically has clear transparent plugs. The clear plug gives the end users an extra comfort level because it allows them to look and make sure the connections are secure.
The P6000 pressure transducer product line now includes very low-pressure ranges and is also available in surface mount configurations.
These advanced medical battery packs can withstand autoclave sterilization. They can tolerate temperatures up to 137°C and are impermeable to 30 PSI of superheated steam.
The ML20 Series miniature photoelectric sensors are available in diffused, divergent, polarized retro-reflective, and thru-beam models, and are a cost-effective sensing solution in any number of industries and applications where space is at a premium and long-range sensing is required.
This ultra-clean TPE technology provides high oxygen barrier performance that is up to ten times better than conventional TPEs and equivalent to traditional thermoset butyl rubber. At the same time, it delivers the exceptional design freedom and potential for part consolidation of thermoplastics.
Standard lines of UniColor universal masterbatch and precolored resin products are offered for use in medical devices, medical packaging, pharmaceutical applications, and disposable medical products.
Makrolon polycarbonate resins provide excellent impact strength, glass-like transparency, excellent temperature resistance, superior processability, and dimensional stability. Certain Makrolon polycarbonate resins designated as “medical-grade” meet FDA-modified ISO 10993-1 requirements.
The QDM brushless series of gear pumps combines the best principles of gear and magnetically driven pumps. Engineered without any drive seals, the pumps offer a leak free, pulse-less, magnetically driven operation.
The Model 775 filling valve is a pneumatically operated spool type valve that can accurately dispense medium to high viscosity fluids. It is capable of dispensing shots of less than 0.01 to over 50 ml and features an adjustable pull-back for crisp shut-off.
The Model 2200-033-011 automatic Snuf-Bak dispense valve is ideal for high volume fluid control and fast shut-off of viscous materials such as polyurethanes, epoxies, silicones, greases, and various cohesive (stringy) and thixotropic adhesives and sealants.
The corrosion-resistant Type 568 butterfly valve’s lug style design is intended specifically for dead-end service and fully pressure rated at 150 psi to allow for easy system expansion to the pipeline without the expense of system shutdown.
A-S Automate is a user-friendly programmable software tool for the control and scheduling of multiple devices in automated testing processes. Data from a range of sources can be captured and processed and many liquid handling components can be controlled simultaneously through one user interface.
This automatic flexible pallet system is designed to increase productivity at most 5-axis vertical and 400 mm horizontal machining centers. Adaptable to new or existing machines, these systems allow unattended, automatic exchange of pallets in only seconds.
A wide range of high-speed, four-, five-, and six-axis robots are offered for payloads of up to 20 kg and with reaches from 350 to 1,300 mm. Repeatability is to within ± 0.015 mm.