The Project: Implement a technology to ensure a reliable consistent temperature is achieved for a coating process.
The Solution: Utilize an iron-chrome-aluminum heating element wire with ceramic fiber insulation to ensure a satisfactory result.
|SCS' PDS 2060PC is a Parylene deposition system that utilizes a ceramic fiber heater from Watlow.|
SCS’s Parylene deposition systems are designed for accurate and repeatable operation. Utilizing a Windows XP-based computer control system, SCS production coating systems feature user-configurable parameters and a flat panel display. Operating temperatures and pressures are continuously monitored and recorded and can be uploaded for system and coating run analysis.
The deposition system must be kept precisely at the high temperature of 680°C (1256°F), with no variation. With a requirement for precision operating temperature, SCS turned to industry leader Watlow to develop a high performance ceramic heater that would reduce temperature deviation.
Watlow’s ceramic fiber heaters integrate a high temperature iron-chrome-aluminum (ICA) heating element wire with ceramic fiber insulation. The ceramic fiber insulation isolates the high temperatures inside the heated chamber from the outside, so energy is used to heat the load instead of the surrounding equipment. Ceramic fiber heaters are low mass, 10 to 15 lb/ft (160 to 240 kg/m), which allows the heater to reach process temperature quickly. The heater’s high insulation value and self-supported heating elements enable operating temperatures up to 1204°C (2200°F).
SCS Parylene coatings are applied to a variety of surfaces with deposition equipment that enables control of both coating rate and thickness. Polymer deposition takes place at the molecular level as Parylene dimer, a white powder, is vaporized under vacuum and heated to form a dimeric gas, then pyrolized to cleave the dimer to its monomeric form, and finally deposited as a transparent polymer film. This manufacturing process takes gas to a solid and essentially skips the liquid step, and that requires a highly accurate, stable heat-up temperature. Coating occurs in an ambient temperature chamber and components are required to have only a reasonable vacuum tolerance.
SCS not only has nine coatings centers around the world, they also sell the equipment to customers. With many systems running worldwide, uptime of the machines for SCS is important. With Watlow’s reputation of quality heaters, SCS does not have to worry about heater failure in their equipment.
“Our baseline requirement was for safe, reliable heaters,” Boyd says. “We have had no recorded technical problems or maintenance issues with Watlow heaters and that reliability and peace of mind is important for our tight process parameters.”