Stryker System 6 surgical power tools
Stryker System 6 surgical power tools have extremely high
precision dimensionality, often down to 0.00015”.

The Stryker Corporation’s highly specialized System 6 power tools, which include high-precision handheld devices such as oscillating bone saws, demand frequent manufacturing requirements for low quantities of these devices. This presents an ongoing challenge for the Production Group’s management team at the company’s main manufacturing location in Kalamazoo. The location is also home to the company’s Experimental Group, which investigates new technologies, advanced materials, and various manufacturing protocols in an effort to maintain optimal productivity for the company. Production Part Approval Process (PPAP) protocols are strategized here as well.

In its tool production, the company uses a variety of substrates including 300 and 400 series stainless steels, 6061 aluminum and titanium, and specialty materials such as Inconel, Nitinol, ALG alloys, etc. In addition, assorted thermoplastics such as Delrin, ABS, Teflon, and thermoplastic elastomers are machined here. Production processes at Stryker are strictly monitored for compliance to FDA standards.

The Experimental Group provides components to Stryker R&D engineers for testing and evaluation, including prototyping surgical tools for field evaluation and

RenShape being machined on the DMG milling center
RenShape being machined on the DMG milling

aesthetic feedback by surgeons, though not for formal trials or surgical use. As a result, Stryker maintains a variety of machine tools and other metalworking equipment at its Kalamazoo facility. Basic milling and drilling equipment is here, alongside three- and five-axis CNC machining centers and EDMs.

Among the newest advanced CNC machines in the Experimental Group is a DMG Model DMC 635 V eco, a powerful three-axis vertical milling center with an 8000 rpm spindle and a 20-position tool changer, all run by the Siemens Sinumerik 810D CNC and ShopMill software onboard. Rich Mitchell, supervisor of the

DMC 635 V eco universal milling center
DMG America supplied this DMC 635 V eco universal
milling center with Siemens Sinumerik 810D numerical
control to the Stryker Instruments Division for its
Experimental Group. The fast and flexible operation
enables a variety of manufacturing techniques to be
tested for production feasibility.

Experimental Group, explains, “We typically store a few programs on the CNC and keep our backlog of programs on a network drive for easy recall. Our group supports about 60 engineers, so the communication between departments is constant and quite fluid. We take IGES or PRT 3D files and can program directly from the digital content, using MasterCAM and now the Siemens ShopMill program that is right on the machine. The Sinumerik 810D control receives excellent ratings from our operators and has fast become their control of choice, especially on this very fast and flexible three-axis ECO milling machine from DMG.” He detailed how the part and tool set-up pages are quite intuitive and incorporate graphic depictions for specific data inputs, thereby reducing the learning curve for the operators. “Most of our guys had never used a Siemens control previously, so it is ironic that this CNC is now their favorite. They literally line up to use it.”

Brandon Morse and Chad Gowan
Brandon Morse and Chad Gowan of the Stryker Experimental
Group review a RenShape model on a knee joint.

Mitchell further noted that program transfer from the Stryker network back to the CNC is fast and simple. This is advantageous to the Experimental Group, where most jobs are one-offs or very small quantities. Operators can write and run multiple programs through each CNC daily, saving time on entering and editing set-up data onto the machine. The very nature of this department, as it conducts various experimental trials to seek out the best production methods and machining strategies, mandates extremely fast turnarounds and Mitchell credits the Siemens CNC for facilitating this process. “We currently have four other controls in our milling department, so it’s easy to imagine the challenges our guys face daily. The Siemens numerical control has worked quite well for us with a manual touch probe and manual Z-axis presetter for tooling. As we expand or replace current milling technology in our production, we will most likely transition to a Siemens 840D with a Renishaw touch probe and tool presetter to expedite set-ups.” The seven operators in the Experimental Group were all given training on the programming of the CNC by DMG, the machine tool builder, represented by Nate Buck, the sales engineer, operating from the builder’s North American headquarters in Itasca, Illinois.

TWIN turning centers
In the Production Group, these TWIN turning centers from DMG
America are equipped with Siemens Sinumerik 840D powerline
CNC and have enabled a reduction in part cycle times better than
20%, according to Stryker engineers.

This machine joins multiple DMG TWIN 65 and TWIN 42 machining centers, each with an upper B-axis to complement the Y-axis and driven tools and create the contours and sophisticated geometries needed at Stryker. These turning machines have the Siemens Sinumerik 840D onboard, which enables precise and transferable control of spindle and axis movement variations via compile cycles, so Stryker Experimental engineers can make more rapid changes in their production scheduling, according to this user.

In one manufacturing example, as detailed by Randy Carpenter, a senior project engineer for Stryker Instrument’s Production Group, “We run families of parts, most often. We have one set of parts, run in 416 and 17-4 (grades of stainless steel) with 38 Rockwell hardness. We’re typically running dimensional tolerances down to the ten-thousandths, so it’s very precise work. Compared to the older machines and controls, we have tracked our cycle times in relation to our target Cpk’s and we are getting better than 20 percent reductions, as a result of the DMG machines with Siemens CNC onboard. Plus, we already see the improvements in surface finish, owing to the smoother translations line to line in the milling and turning programs.” Carpenter also noted his production department has been able to achieve considerably higher changeover efficiencies that allow more jobs to run per shift. “System 6 has become a big seller for Stryker and our ability to ramp up production on the DMG machines with Siemens numerical controls has been a big plus.”