As material costs rise, designers are attempting to use as little as possible for their components without sacrificing the functionality or durability of a part. While this is the goal for virtually every designer across every industry, accomplishing it can be a challenging task. Using rapid injection molding for prototype parts, designers can get a much better handle on achieving this task.
We’ve all seen cartoons of the caveman with his waist-high stone wheel. It literally weighs a ton and never seems to be attached to anything. We’ve seen images of chest-high, solid wood wheels on a peasant’s lumbering cart; better than nothing but still far from race-ready. The real breakthrough in wheel design came when some genius realized that a wheel needs a hub and a rim but that most everything in between is superfluous. It was only with the invention of spokes that the wheel became the lighter, more economical geometry that it is today.
The same principle applies to plastic parts. Plastic is inherently light, generally economical, and relatively easy to form. But that doesn’t mean that it can’t, with thoughtful design, be lighter still and even more economical, all without sacrificing performance or complicating manufacturing. Accomplishing this requires the elimination of unnecessary material, which raises two questions: why and how.
“Why” has several answers, and the first is cost. A recent item in TPE (The Plastic Exchange) pointed out that buyers were snapping up supplies of resin in late January 2012 to avoid price increases expected in February. The impending increases ranged from $.02 to $.06 per pound on some relatively inexpensive resins: polyethylene and polypropylene. If pennies-per-pound savings are that motivational, any significant reduction in the per-part volume of resin could be even more worthwhile, and such savings would be proportionally greater on more expensive resins.
The second reason to trim down is weight. From bicycles and cars to military gear and aerospace, weight reduction has become a kind of Holy Grail. Plastic is, of course, lighter than metal, but less plastic is lighter still. As the saying goes, “You can never be too thin or too rich,” and in today’s market, being lighter can make you richer by reducing cost while maintaining functionality and potentially increasing overall performance.
Regarding “how,” one of the simplest ways to lose weight in a plastic part is to core out thick areas. This not only saves money and weight, but also prevents problems like sink, voids, and warps. Another approach is skeletonization. The concept has been used for years and applied to all sorts of materials. Wood and metal trusses are designed to maintain strength while minimizing material requirements. So is a honeycomb. In many cases, hollow cylinders can replace solid posts, and properly positioned arches can redirect forces and replace bulky solid supports. All of these techniques can be incorporated into plastic parts. The challenge is to remove material without impairing function. Figure 1 shows an example of the process.
Since resins vary widely in their characteristics, the amount of material that can be eliminated from a particular design will depend on the material, and choices of material and form will interact as the designer searches for an optimal design. Finite element analysis (FEA) software is great during the early virtual phase of development, but prototypes using actual materials are necessary for testing and refining the design as the process moves forward.
Thoughtful prototyping by rapid injection molding can provide maximum information at minimum cost. Designers can test multiple resins in the same mold (keeping in mind that resins with different shrink rates will produce parts of slightly different dimensions). Depending on what is to be tested (e.g., individual part performance rather than a final assembly), this may not be a problem. Also, if the plan involves testing varying degrees of skeletonization, remember that metal is easy to remove from a mold but hard to add, and less metal means more plastic. In other words, start with the most trimmed down version of the part. If it doesn’t stand up to testing, plastic can be added for the next iteration by milling more metal from the mold instead of starting from scratch. As with skeletonizing a part, it’s a way of trimming fat from the development process, maintaining effectiveness while reducing cost and effort.
For more information, visit www.protolabs.com.