
The new, ½” size, lug-mounted Series RVDT uses an adjustable non-wetted spring to control backpressure in a piping system. The set-point is adjustable, and once the set pressure is reached, the valve begins to open. It will allow the rated full flow at approximately 40% over the set pressure. This operation enables the valve to provide a controlled obstruction in a piping system as needed. This is invaluable in providing backpressure on a pump, or backpressure to maintain flow to points of use. It can also be employed to open and relieve dangerous pressure in a system. These same characteristics enable the valve to remain closed in the event of downstream vacuum, and prevent siphoning of hazardous chemicals.
All wetted materials are thermoplastic; the metal spring is
isolated from the process liquid by a PTFE diaphragm. The ½” lug-mounted RVDT
is offered in body materials of
Geon® PVC, Natural Polypropylene, Corzan® CPVC, and Kynar® PVDF. Pressure can
be set infinitely from 5 to 150 PSI. The valves can be factory modified for
special applications.