Transformers/Converters/Conditioners

Featured Products

Other Products

Low Noise AC-DC Converters

Polytron Devices has launched its new MHIA series of UL 60601-1 Third Edition recognized and 2MOPP-compliant linear encapsulated AC-DC power modules for medical applications including surgical, patient monitoring, imaging, laboratory and...

LISTED UNDER: Transformers/Converters/Conditioners

65W AC-DC Converters

Polytron Devices has launched its new MUI65 series of AC-DC power supplies designed for medical applications. These 65-watt power supplies deliver a universal input range, 92 percent high efficiency and 2 MOPP isolation for patient protection...

LISTED UNDER: Power Supplies | Transformers/Converters/Conditioners

LED Driver ICs

Arctic Sand Technologies launched its ARC1C0608 IC – a ‘triple-play’ delivering excellent power conversion efficiency, with a very low ‘z’ height profile and small footprint. The ARC1C0608 is an LED driver that is able to save 0.5W (in a typical 2W...

LISTED UNDER: Transformers/Converters/Conditioners

AC-DC Converters for Safety in Medical Applications

Polytron Devices has launched its new UI310 series of AC-DC power supplies designed for medical applications. These 300-watt minimum power supplies offer a universal input range, LED indication and 2x MOPP isolation. In addition, the UI310 comes with...

LISTED UNDER: Transformers/Converters/Conditioners

Easy-to-Install Current Transducer

NK Technologies introduces the AT/ATR-MS Series AC Current Transducer, combining a current sensing element and signal conditioner into a single package. The large, easy-to-install, split-core design allows for installation over existing conductors without...

LISTED UNDER: Transformers/Converters/Conditioners

10 Watt DC/DC Converter

Minmax Power is pleased to announce the MJW10 Series, a new range of cost-optimized 10W isolated DC/DC converters that are encapsulated in a 1” x 1” industry standard package, and featuring fully regulated output voltage. This new MJW10 Series...

LISTED UNDER: Transformers/Converters/Conditioners

Medical Isolation Transformers

Triad Magnetics, a manufacturer of magnetic components for medical, industrial, commercial and aerospace applications, introduces the VPM Series of medical-grade toroidal isolation transformers offering both 4KV of dielectric isolation and low-voltage step-down...

LISTED UNDER: Inductors | Transformers/Converters/Conditioners

Passive Harmonic Filters

Schaffner EMC introduces ECOsine 60 Hz Passive Harmonic Filters which remove harmful harmonics of a pre-determined order, to increase the reliability of supplied power, and thus extend the service life of downstream components. With plug-and-play...

LISTED UNDER: Other Motors | Transformers/Converters/Conditioners

1W Surface-Mount DC-DC Converters

Murata has introduced the NXJ1, a series of single output, high reliability, high isolation, 1W surface-mount DC-DC converters designed for medical products, with other applications in industrial, transport, and telecom markets. Manufactured by Murata Power...

LISTED UNDER: Power Supplies | Transformers/Converters/Conditioners

20 Watt DC/DC Converters, Chassis Mount/DIN Rail

Minmax Power is pleased to announce the MOWI20C Series, a new Series of regulated, fully encapsulated DC/DC converters with an ultra-wide 4:1 input voltage range, extended operating temperature range of -40°C to +90°C, and easy mounting configurations...

LISTED UNDER: Transformers/Converters/Conditioners

3-Amp DC-DC Buck-Boost Power Converter

Tech9 Corporation has just introduced a new 3 amp power converter offering input voltages ranging from 6V to 70V with inputs including 1.5V, 2V, 3V, 3.3V, 5V, 6V, 9V, 12V, 15V, 14V and 48V. Efficiency is typically 90% with short circuit protection...

LISTED UNDER: Power Supplies | Transformers/Converters/Conditioners

Converters and Battery Chargers for Extreme Environmental Conditions

Schaefer, Inc. introduces the C3700 Series of 1250 Watt DC-DC and AC-DC converter modules and battery charger. Utilizing industrial grade components, the compact and robust 6U design provides a highly efficient, space-saving solution for the most...

LISTED UNDER: Battery Charger | Power Supplies | Transformers/Converters/Conditioners

9W DC-DC Converter

Power Sources Unlimited, Inc. proudly announces the new TMR 9 and TMR 9WI Series which are the world’s first DC-DC converter in a SIP-8 package that provides an isolated and regulated output voltage delivering 9 Watts of output power to our TRACO Power...

LISTED UNDER: Transformers/Converters/Conditioners

3W DC-DC Converters

Murata announces the NCS3 series of isolated 3 watt DC-DC converters manufactured by Murata Power Solutions. These through-hole mounting converters are packaged in an industry standard, pin compatible, SIP format, making them ideal as a replacement...

LISTED UNDER: Transformers/Converters/Conditioners

2W DC/DC Converter

Minmax Power announces the MAEU02-HI Series, a new family of isolated 2 Watt DC/DC converter modules in an industry standard SIP-7 package that featuring ultra high I/O isolation of 5200VDC. There are 40 models available with input voltage...

LISTED UNDER: Transformers/Converters/Conditioners

Pages

Featured Companies